DRIVE GP-FAN 1072547 - Caterpillar

1072547 DRIVE GP-FAN Caterpillar parts 3056

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1072547
107-2547
1072547

Buy DRIVE GP-FAN 1072547 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

1072547 Cone Mask Dispenser Ea Unimed-Midwest Inc -CCBM061390

$55.88

18 Jun 2019
63 Hundredths Pounds
BND: BND

1072547 Cone Mask Dispenser Ea Unimed-Midwest Inc -CCBM061390
Cone Mask Dispenser Ea || CCBM061390 || Unimed-Midwest Inc || EA || ***Photo May not always be of actual product however Title is 100% accurate-USE TITLE

Number on catalog scheme:

Caterpillar 1072547 Parts scheme DRIVE GP-FAN

For full view, you need register

Compatible equipment models: 1072547:

GEN SET ENGINE 3056 Caterpillar

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9202 Lever Puller Hoist 2
B FT-1714 Wedge 2
C 189-0412 Shackle As 2
1U-8227 Lifting Sling 2
D 6V-3175 Double Acting Cylinder 1
9U-5344 Puller Stud 1
3S-6224 Electric Hydraulic Pump Gp 1
9U-5346 Nut 1
9X-8399 Washer 1
E FT-2802 Puller Plate 1 Start By:
Remove the tilt cylinder. Refer to Disassembly and Assembly, "Bulldozer Tilt Cylinder - Remove and Install".
Illustration 1 g00950256
Raise the implement and install wood blocks under C-frame (1) so that C-frame (1) is approximately eight inches off the ground.
Illustration 2 g00950257
Install Tooling (A) on the bulldozer angle cylinder. This will support the angle cylinder after the blade is removed. Repeat the step for the angle cylinder on the opposite side of the machine.
Illustration 3 g00950259
Remove bolt (2) and retainer (3) .
Remove pin (4) from angle cylinder (5) . Mark the spacers and remove spacers (6) .
Repeat steps 3 and 4 for the angle cylinder on the opposite side of the machine.
Illustration 4 g00950291
Install Tooling (B) between upper bracket (7) on the bulldozer and the boss of C-frame (8) .
Illustration 5 g01098875
Attach Tooling (C) and a suitable lifting device to bulldozer (9) . Apply slight lifting force.
Install Tooling (D) to pin (10) and remove pin (10) .
Illustration 6 g00950263
Remove bolts (11) , retainer (12) , pin (13) , and yoke (14) .
Illustration 7 g01098878
Remove bulldozer (9) from the machine. The weight of bulldozer (9) is approximately 953 kg (2100 lb).
Illustration 8 g00951284
Use Tooling (E) in order to remove bearing (15) from upper bracket (7) .
Illustration 9 g00951310
Use Tooling (E) in order to remove bearing (16) from yoke (14) .