DRIVE GP-HYDROSTATIC 1139767 - Caterpillar

Personal injury can result from rotating and moving parts.Moving fan blades and moving parts will throw or cut any object or tool that falls or is pushed into them.Make sure no one is working on, underneath or close to an engine that is running. Make sure the area is free of personnel.
Specifications
Table 1
Test Specifications    
Date    Product or Component SN    
Component Location    Specification    Actual    
"Work" mode time through a
30.5 m (100 ft) course.     The forward and reverse speeds should be 28 to 32 seconds.        
"Propel Travel" mode time through a
30.5 m (100 ft) course.     The forward and reverse speeds should be 9 to 11 seconds.        Introduction
Use this test to determine if the machine speed is correct. Incorrect machine speed may indicate a problem in the propel system.Required Tools
Table 2
Required Tools    
Tool    Item    Qty    Part No    Description    
A         1     9U-7839     Stopwatch    Test Preparation
Establish a 30.5 m (100 ft) straight speed-test course.Note: The overall test area must be large enough to allow