DRIVE GP-SWING 1141409 - Caterpillar

(1) Spanner nut. Tighten to a torque of ... 30 5 lb. ft.(40 7 N m) It is permissible to tighten nut (1) as much as 30° farther for the alignment of a part of lock (2) with a slot in nut (1). Do not loosen nut (1) to fasten lock (2).(4) *End play for the pulley ... .001 to .010 in.(0.03 to 0.25 mm) Put 2S3230 Bearing Lubricant in areas (A) until they are one-third to one-half full of lubricant.Later
(1) Standard 9/16-18 thread nut. Tighten to a torque of ... 110 15 lb. ft.(149 20 N m)(3) Dowel that fastens shaft to bracket. This dowel can be used for identification for correct torque. Only the bracket assemblies with the dowel must maintain the higher torque.(4) *End play for the pulley ... .001 to .010 in.(0.03 to 0.25 mm) Put 2S3230 Bearing Lubricant in areas (A) until they are one-third to one-half full of lubricant.*For end play adjustment procedure, See Testing and Adjusting in 3208 DIESEL TRUCK ENGINE Service Manual.