DRIVE GP-FINAL 1575072 - Caterpillar

Illustration 1 g00801869
Service Hour Meter (1) - The service hour meter indicates the total operating hours of the engine. To determine the service hour maintenance interval, use the service hour meter.
Transmission Oil Temperature (2) - The transmission oil temperature gauge indicates the temperature of the transmission oil. The gauge registers 60 - 150°C (140 - 302°F).
Engine Coolant Temperature (3) - The engine coolant temperature gauge indicates the temperature of the coolant in the engine. Normal operating pressure is indicated when the needle is in the green zone. If the temperature increases into the red zone, stop the machine immediately. Stop the engine and investigate the cause. Do not operate the machine until the cause has been corrected.
Engine Oil Pressure (4) - The engine oil pressure gauge indicates the pressure of the engine oil. Normal operating pressure is indicated when the needle is in the green zone. If the needle falls into the red zone, immediately stop the machine and investigate the cause. Do not operate the machine until the cause has been corrected.
Fuel Level (5) - The fuel level gauge indicates the amount of diesel fuel in the tank.
Hydraulic Filter Restriction (6) - The light shows the need for the hydraulic filter to be replaced. Speedometer (7) (If equipped). The speedometer indicates the travel speed of the machine.
Illustration 2 g00802148
The gauge (8) for the level of the water tank can be seen through the rear window. This gauge determines the level of water in the tank.Speed and Vibratory Module (If Equipped)
Illustration 3 g00811677
The vibratory meter records the vibration per minute while the machine travels at different speeds.