1693701 DRIVE GP-FAN Caterpillar parts
D9R
Rating:
Alternative (cross code) number:
CA1693701
169-3701
1693701
CA1693701
169-3701
1693701
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
#US Replace Parts Plunger Interlock Switch for Simplicity 1693698 1693699 1693700 1693701 1693703 (datG.0825#25022)
Generic NOTE: It's a replacement parts, but it's not genujne || Plunger Interlock Switch for Simplicity 1693698 1693699 1693700 1693701 1693703 || Model number is just for reference, Product will not work for every model. || Due to bulk item storage, there may be some minor scratches. || Manufacture parts number: #10111990-25022
Generic NOTE: It's a replacement parts, but it's not genujne || Plunger Interlock Switch for Simplicity 1693698 1693699 1693700 1693701 1693703 || Model number is just for reference, Product will not work for every model. || Due to bulk item storage, there may be some minor scratches. || Manufacture parts number: #10111990-25022
The ROP Shop | Plunger Interlock Switch for Simplicity 1693698 1693699 1693700 1693701 1693703
The ROP Shop The ROP Shop | Plunger Interlock Switch for Simplicity 1693698 1693699 1693700 1693701 1693703 || Specs - Positions: 2. Terminals: 2. Refer to images 2 & 3 for more information || Includes - (1) Plunger Interlock Switch; comes as shown in the first image || Normally Open (N.O.) || Please be sure to check your part or model number to ensure this is the correct plunger tnterlock switch for your unit. Also, please note this may replace multiple parts numbers
The ROP Shop The ROP Shop | Plunger Interlock Switch for Simplicity 1693698 1693699 1693700 1693701 1693703 || Specs - Positions: 2. Terminals: 2. Refer to images 2 & 3 for more information || Includes - (1) Plunger Interlock Switch; comes as shown in the first image || Normally Open (N.O.) || Please be sure to check your part or model number to ensure this is the correct plunger tnterlock switch for your unit. Also, please note this may replace multiple parts numbers
RIVERTON CANDLE & BATH for Arbor Housing for Simplicity 2526H 2690029, 2690030 & 2617HC 1693701 Mower
RIVERTON CANDLE & BATH For Arbor Housing for Simplicity 2526H 2690029, 2690030 & 2617HC 1693701 Mower || Arbor Housing desied for 2526H, 2690029, 2690030, and 2617HC mowers, ering perfect fit and perforce. || Durable construction and materia provide -lasting reliability for your mower mode 1693701. || Experience Superior Performance with Our Durable Replacement Parts! || Guarantee Perfect Fit – Double-Check Product Dimensions and Photos Before Purchase.
RIVERTON CANDLE & BATH For Arbor Housing for Simplicity 2526H 2690029, 2690030 & 2617HC 1693701 Mower || Arbor Housing desied for 2526H, 2690029, 2690030, and 2617HC mowers, ering perfect fit and perforce. || Durable construction and materia provide -lasting reliability for your mower mode 1693701. || Experience Superior Performance with Our Durable Replacement Parts! || Guarantee Perfect Fit – Double-Check Product Dimensions and Photos Before Purchase.
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 1693701:
Information:
Illustration 1 g02042457
Schematic of the "Auxiliary Pedal 1 Control Pressure" SensorThis diagnostic code is associated with the "Auxiliary Pedal 1 Control Pressure" Sensor. This diagnostic code is recorded when the Machine ECM reads the sensor signal voltage and the voltage is too high. The possible causes of this diagnostic code are listed below:
The sensor has failed.
The sensor supply or the ground circuit in the machine harness is open.
The signal circuit in the machine harness is shorted to the +battery.
The signal circuit in the machine harness is open or the sensor is disconnected.
The Machine ECM has failed. A failure of the ECM is unlikely.Test Step 1. CHECK THE CONTROL AND THE HARNESS.
Turn the disconnect switch and the key start switch to the ON position.
Disconnect the machine harness from the pump pressure sensor.
At the machine harness connector for the sensor, measure the voltage (VDC) between the signal contact 3 (wire N795-WH) and the ground contact 2 (wire 235-BK).Expected Result:The voltage is 8.0 0.5 VDC. Results:
OK - The voltage is 8.0 0.5 VDC. Repair: The Machine ECM and the harness are correct. The sensor has failed. Replace the sensor. STOP
NOT OK - The voltage is NOT 8.0 0.5 VDC.Repair: The Machine ECM or the harness has failed. Proceed to Test Step 2.Test Step 2. CHECK THE GROUND CIRCUIT OF THE HARNESS
The sensor remains disconnected from the machine harness.
Turn the disconnect switch and the key start switch to the OFF position.
Disconnect the J1 and J2 machine harness connectors from the Machine ECM.
At the machine harness connector for the sensor, measure the resistance between ground contact 2 (wire 235-BK) and frame ground. Expected Result:The resistance is less than 5.0 ohms.Results:
OK - The resistance is less than 5.0 ohms. The harness resistance is correct. Proceed to Test Step 3.
NOT OK - The resistance is greater than 5.0 ohms.Repair: The ground circuit in the harness has failed. There is an open circuit between the ground contact and frame ground. Repair the machine harness or replace the machine harness.STOPTest Step 3. CHECK FOR A SHORTED HARNESS
The sensor and the Machine ECM remain disconnected from the machine harness.
The disconnect switch and the key start switch remain in the OFF position.
Measure the resistance between the signal contact 3 (wire N795-WH) and contact 1 (wire J850-WH) of the machine harness connector for the sensor. Expected Result:The resistance is greater than 5000 ohms.Results:
OK - The resistance is greater than 5000 ohms. The harness circuit resistance is correct. Proceed to Test Step 4.
NOT OK - The resistance is less than 5000 ohms.Repair: The machine harness has failed. There is a short between the +battery circuit and the signal circuit in the machine harness. Repair the machine harness or replace the machine harness.STOPTest Step 4. CHECK FOR AN OPEN HARNESS
The sensor and the Machine ECM remain disconnected from the machine harness.
The disconnect switch and the key start switch remain in the OFF position.
Measure the resistance of the signal circuit from the connector contact J1-45 (wire N795-WH) of the Machine ECM
Caterpillar SIS machinery equipment:
Caterpillar SIS
D9R Track-Type Tractor Differential Steering ABK00001-UP (MACHINE) POWERED BY 3408 Engine »
169-3701
DRIVE GP-FAN
D9R Track-Type Tractor Power Shift ACL00001-UP (MACHINE) POWERED BY 3408 Engine »
169-3701
DRIVE GP-FAN
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine »
169-3701
DRIVE GP-FAN
Caterpillar parts catalog:
Parts drive Caterpillar catalog:
1236968
DRIVE GP-FAN
769D, 771D, 773D, 775D, D10R, D9R
769D, 771D, 773D, 775D, D10R, D9R
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16H, 16H NA, 16M, 2290, 2390, 2391,...
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 657E, 769C, 772B, 773B, 775B, 834B, 988B, 988F, 992C, D10N, D8L, D9L, D9N, D9R, PR-1000, PR-450C, PR-750B
1659055
DRIVE GP-FAN
D8L, D9N, D9R
D8L, D9N, D9R
307B, 307C, 308C
2003502
DRIVE GP-FINAL
330C, 345B II, 345B II MH
330C, 345B II, 345B II MH
1229646
DRIVE GP-WINDOW
318B, 325B, 325B L, 330B, 345B II
318B, 325B, 325B L, 330B, 345B II
1176263
DRIVE GP-WINDOW
318B, 325B, 325B L, 330B
318B, 325B, 325B L, 330B
1994589
DRIVE GP-SWING
365B, 365B II, 365B L, 365C, 365C L, 365C L MH
365B, 365B II, 365B L, 365C, 365C L, 365C L MH
1994588
DRIVE GP-SWING
365B, 365B II, 365B L
365B, 365B II, 365B L