DRIVE GP-TRAVEL MOTOR & FINAL 1911384 - Caterpillar

Tighten two 9S8007 Plugs in engine side of pump housing to a torque of ... 5 1 N m (4 1 lb.ft.)(1) Torque for bushing ... 215 15 N m (160 11 lb.ft.)(2) 8N5993 Spring (reverse flow check): Length under test force ... 11.50 mm (.453 in.)Test force ... 151 8 N (34.2 1.8 lb.)Free length after test ... 15.81 mm (.622 in.)Outside diameter ... 10.36 mm (.408 in.)(3) Thickness of 8N672 Spacer ... 5.049 0.005 mm (.1988 .0002 in.)(4) Torque for cover bolts ... 14 4 N m (10 3 lb.ft.)(5) Length of pump plunger (new) ... 79.044 0.013 mm (3.1120 .0005 in.) Minimum permissible length (worn) ... 79.031 mm (3.1115 in.)(6) 8N670 Spring (lifter): Length under test force ... 46.380 mm (1.8259 in.)Test force ... 284.411 14.221 N (63.9925 3.1917 lb.)Free length after test ... 55.472 mm (2.184 in.)Outside diameter ... 33.604 mm (1.323 in.)(7) Bore for the rack and diameter of the rack: Bore in bearing (after installation) in governor end of housing ... 12.746 0.045 mm (.5018 .0018 in.)Bore in bearing (after installation) in drive end of housing ... 12.767 0.058 mm (.5026 .0023 in.)Diameter of rack (new) ... 12.662 0.005 mm (.4985 .0005 in.)(8) Bore in bearings for camshaft (after assembly) ... 68.339 0.038 mm (2.6905 .0015 in.) Diameter of bearing surfaces of the camshaft ... 68.250 0.013 mm (2.6870 .0005 in.) (9) Setscrew. Tighten the four setscrews in drive end of camshaft (10) to a torque of ... 21 7 N m (15 5 lb.ft.)(10) Camshaft.