DRIVE GP-SWING 1994590 - Caterpillar

Illustration 5 g01041350
Table 5
Service Parts    
Item     Pt. No.     Description     Qty    
18     178-9312     Hose As     1    
19     178-9313     Coupler Block Gp     1    
20     185-0683     Pressure Gauge As     1    
21     185-4436     Pressure Gauge As for 227-6724227-8834191-5347 Hydraulic Pump Gps     1    
22     178-9058     Hydraulic Cylinder Seal Kit for 191-5322 Hydraulic Cylinder Gp     1    
175-0191 Hydraulic Cylinder Seal Kit for 191-5323 Hydraulic Cylinder Gp     1    
227-6725 Pump Seal Kit for 227-6724227-8834 Hydraulic Pump Gps     1    
194-8202 Pump Seal Kit for 191-5347 Hydraulic Pump Gp     1    Specifications and Reference Materials
Table 6
Specifications    
191-5322 Hydraulic Cylinder Gp (Stud Tensioner)    
Maximum tensioning force    
1100 kN (24,7291 lb)    
Maximum operating pressure    
150 MPa (21,756 psi)    
Effective piston surface    
73.2 cm2 (11 in2)    
Stroke    
10 mm (0.39 inch)    
Weight    
9.5 kg (21 lb)    
191-5323 Hydraulic Cylinder Gp (Stud Tensioner)    
Maximum tensioning force    
2015 kN (452,992 lb)    
Maximum operating pressure    
150 MPa (21756 psi)    
Effective surface area of piston    
134.3 cm2 (20.8 in2)    
Stroke    
10 mm (0.39 inch)    
Weight    
19.5 kg (43 lb)    
227-6724227-8834 Electric Hydraulic Pump Gps    
Oil capacity    
3.8 L (1.0038 US gal)    
Maximum operating pressure    
150 MPa (21,756 psi)    
Voltage and frequency     120/240 VAC 60/50 Hz    
Weight    
33 kg (73 lb)    
191-5347 Hydraulic Pump Gp ( Pneumatic)    
Oil capacity    
4.0 L (1.0567 US gal)    
Maximum Operating Pressure    
150 MPa (21,756 psi)    
Air pressure    
352-800 kPa (51-116 psi)    
Air consumption    
394-780 L/min (104-206 US gpm)    
Weight    
22 kg (49 lb)    
Oil Specifications    
Oil viscosity at
50 ° C (122 ° F)     1.75 E-9.1 Centistokes    
Maximum oil temperature    
60 ° C (140 ° F)    
Oil approval     HLP10 nach/acc.to VDMA 24318 bzw.//resp. DIN 51525    
Reference Materials    
NEHS0866     "Operation and Maintenance of Stud Tensioner Tooling Group use on 3600 Engines (except 3618)"    
SENR4259     "Disassembly and Assembly G3606 and G3608 Engines"    
SENR5535     "Disassembly and Assembly G3612 and G3616 Engines"    
SENR3600     "Disassembly and Assembly 3606 and 3608 Engines"    
SENR3594     "Disassembly and Assembly 3612 and 3616 Engines"