DRIVE GP-MAIN 2094668 - Caterpillar

Illustration 28 g00503348
Place the impeller hub on wood blocks.
Remove twelve bolts (40) from drive flange (38).
Illustration 29 g00503350
Remove drive flange (38) from the impeller hub and converter impeller (41).
Illustration 30 g00503351
Remove converter impeller (41) from impeller hub (42).
Illustration 31 g00503352
Remove two thrust bearing races (43) and the thrust bearing from the carrier assembly.
Illustration 32 g00503533
Remove carrier assembly (44) and the stator as a unit from rotating housing (39).
Illustration 33 g00503534
Remove snap ring (45).
Illustration 34 g00503535
Heat stator (46) and carrier assembly (44) as a unit to a minimum temperature of 121°C (250°F) for one hour. This will expand stator (46).
Remove stator (46) from carrier assembly (44).
Illustration 35 g00503536
Remove retainer ring (47) from stator (46).
Illustration 36 g00503537
Remove sleeve bearing (48) from carrier assembly (44).
Illustration 37 g00503538
Remove two thrust bearing races (49) and the thrust bearing from the hub.
Illustration 38 g00503539
Remove converter turbine (50) and turbine hub (51) as a unit from rotating housing (39).
Illustration 39 g00503540
Remove twenty bolts (52) and the washers from converter turbine (50).
Remove converter turbine (50) from turbine hub (51).
Illustration 40 g00503541
Remove retaining ring (53) from turbine hub (51).
Illustration 41 g00503542
Remove two thrust bearing races (54) and thrust bearing (55) from the cover assembly.
Illustration 42 g00503564
Remove eight bolts (56) and the washers from cover assembly (57).
Remove cover assembly (57) from rotating housing (39).
Remove ring seal (58) from rotating housing (39).
Illustration 43 g00503567
Remove sleeve bearing (59) from cover assembly (57).