DRIVE GP-AUGER 2258809 - Caterpillar

European Compliance for CE Marking:These listings apply to stationary industrial markets only and are limited only to those units bearing the CE Marking. EMC Directive:Declared to 2004/108/EC COUNCIL DIRECTIVE of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and all applicable amendments. Other European and International Compliance:Compliance with the following European Directives of standards does not qualify this product for application of the CE Marking. Machinery Directive:Compliant as a component with 98/37/EC COUNCIL DIRECTIVE of 23 July 1998 on the approximation of the laws of the Member States relating to machinery. Pressure Equipment Directive:Exempt per clause 4 of the Pressure Equipment Directive 97/23/EC of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment. North American Compliance:These listings are limited only to those units bearing the CSA identification. CSA:CSA Certified for Class 1, Division 2, Groups A, B, C & D, T3 at 85°C Ambient for use in Canada and the United states. Certificate pending.This product is certified as a component for use in other equipment. The final combination is subject to acceptance by the authority having jurisdiction or local inspection.Wiring must be in accordance with North American Class 1, Division 2 wiring methods, as applicable, and in accordance with the authority having jurisdiction. Special Conditions For Safe Use:Field wiring must be suitable for at least 85°C.Connect ground lug of TecJetTM 52 to earth ground.The TecJet 52 actuator should be protected from exposure to sunlight and rain.The Ingress protection rating of the control depends on the use of proper mating connectors. Refer to Table 2-1 in the Installation section of this manual for information on the proper mating connectors for use with this control.