DRIVE GP-ACCESSORY 2433274 - Caterpillar

Illustration 1 g01029345
Remove the Access Cover
Use an allen wrench to loosen the bolts (3). Loosen the bolt until resistance is felt.
Push down the bolts. Turn the bolts by 180°.
Remove the access cover (1) .Install the Access Cover
Install the access cover (1) .
Push down the bolts and turn the bolts until the latches (2) are visible through the slots (4) at the edge of the access cover.Note: If the latches are not visible through the slots (4) at the edge of the access cover, the access cover will not lock in place.
Use an allen wrench to tighten the bolts (3). Tighten the bolts until resistance is felt.