DRIVE GP-CIRCLE 2656725 - Caterpillar

Illustration 2 g01329659
The system is frozen in this state.
In order to release the machine from the frozen state, reposition the machine, then place the bucket tip on the same common touch point.
Press the "Touch-Point" button .
The Display should momentarily blink the message "Position Updated" and return to the normal Depth Mode screen.You will now be working to the same zero depth (bench) before the machine was repositioned.Using the Memories
The "Memory Advance" button is used in order to toggle to the next Target Depth value stored in memories D1-D7.The memory indicator is displayed on the right hand side of the screen, as shown in Illustration 3.
Illustration 3 g01330427
Depth and Slope Memory Indicators (12) Target Depth (13) Slope Memory Indicator (14) Depth Memory IndicatorSelect a Memory
Depth Memory Only
In order to select a depth memory, perform the following Steps.
Toggle the "Memory Focus" switch to the right-most position.
Press the "Memory Advance" button until you get to the desired memory. The depth memory indicator should increment each time you press the "Memory Advance" button .Slope Memory Only
In order to select a slope memory, perform the following Steps.
Toggle the "Memory Focus" switch to the left-most position.
Press the "Memory Advance" button until you get to the desired memory. The slope memory indicator should increment each time you press the "Memory Advance" button .Both Depth and Slope Memory
In order to select the same depth and slope memory number, perform the following Steps.
Toggle the "Memory Focus" switch to the middle position.
Press the "Memory Advance" button until you get to the desired memory. Both the depth and slope memory indicators should increment each time you press the "Memory Advance" button .Store a Target Value to Memory
Depth Memory
When you use the "Depth Adjust" switch, the switch changes the information that is displayed on the screen as well as the information that is stored in the corresponding memory.In order to store a "Target Depth", perform the following procedure.
Toggle the "Memory Focus" switch to the right-most position.
Press the "Memory Advance" button until you get to the desired depth memory.
Do one of the following:To increment the "Target