DRIVE GP-SWING 2676933 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01775135
Remove clamps (1).
Remove bolts (2), the nuts, and the washers. Remove the elbow and plate (3).
Illustration 2 g01775136
Remove the bolts and elbow (6).
Remove bolts (5), bolt (7), and the washers from auxiliary water pump (4).
Illustration 3 g01775137
Attach Tooling (A) and a suitable lifting device to auxiliary water pump (4). The weight of auxiliary water pump (4) is approximately 39 kg (86 lb).
Pull auxiliary water pump (4) and the drive gear out of the front housing. Remove auxiliary water pump (4).