DRIVE BELT 2762445 - Caterpillar

Illustration 1 g06268186
Disconnect hose assemblies (1) and (2).
Illustration 2 g06268198
Disconnect hose assembly (3).
Illustration 3 g06268205
Loosen clamp (4) and disconnect hose (6). Disconnect hose assembly (5).
Illustration 4 g06268274
Remove straps (7) and disconnect harness assembly (8).
Illustration 5 g06268298
Remove straps (9) and (11). Disconnect harness assemblies (10), (12), and (13).
Illustration 6 g06268559
Remove straps (15) and disconnect harness assemblies (14).
Illustration 7 g06268573
Remove bolt (17) and spacer (16).
Illustration 8 g06268644
Remove bolt (18) and spacer (19).
Illustration 9 g06268649
Remove bolt (20).
Illustration 10 g06268651
Disconnect hose assemblies (21).
Illustration 11 g06268657
Loosen clamp (22) and disconnect hose (23).
Illustration 12 g06268661
Disconnect hose assembly (24).
Illustration 13 g06268883
Attach Tooling (A) and a suitable lifting device to engine (25). The weight of engine (25) is approximately 816 kg (1800 lb).
Illustration 14 g06268900
Use cribbing to support engine (25).
Illustration 15 g06268951
Disconnect clip (27) and remove mounting bolts (26).
Illustration 16 g06268963
Attach a suitable lifting device to piston pump (28). The weight of piston pump (28) is approximately 218 kg (480 lb). Remove bolts (29) that attach piston pump (28). Remove piston pump (28).Installation Procedure
Install piston pump (28) in the reverse order of removal.
Tighten mounting bolts (26) to a torque of 950 50 N m (700.68200 36.87800 lb ft).