DRIVE GP-FINAL 2824029 - Caterpillar

Illustration 1 g01152879
Monitoring System Display (1) Action Lamp (2) Clock (3) Engine Speed Dial Indicator (4) Fuel Gauge (5) Hydraulic Oil Temperature Gauge (6) Engine Coolant Temperature Gauge (7) KeypadThe monitoring system display will display various warnings and information about the condition of the machine. The monitoring system display has three gauges and a number of alert indicators. Each gauge is dedicated to a parameter within a machine system. The monitoring system will allow the user to do the following:
View system status information
View parameters
View service intervals
Perform calibrations
Troubleshoot machine systemsSome of the possible parameters of the machine systems are listed: fuel level, engine coolant temperature and hydraulic oil temperature. The gauges receive information from sensors or senders that are connected to the controller. The controller uses the information from each sensor input to calculate the value that is shown on the gauges.The alert indicators will notify the operator of an abnormal condition in a machine system. The controller uses information from pressure switches, sensors and other inputs in order to determine when an abnormal condition is present. The controller will send a message to the monitoring system display. Then, the monitoring system will display a pop up alert indicator for the machine system with the abnormal condition.
Illustration 2 g01152977
Keypad (8) Up key (9) Right key (10) Home key (11) Main menu key (12) Left key (13) Down key (14) Cancel key or Back key (15) OK keyThe keypad (7) is used in order to provide input and in order to navigate through the menu structure of the monitoring system. Refer to Illustration 2.