DRIVE GP-FINAL 2978145 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
(A) 138-7575 Link Bracket 4
Illustration 1 g00696735
Fasten Tooling (A) and a hoist to cab (25), as shown. The weight of the cab is 295 kg (650 lb).
Close the cab door. Carefully position the cab on the operator platform.
Illustration 2 g00488062
Install handle assembly (24) and bolts (23).
Illustration 3 g00488060
Install bolts (22) that secure the cab to the operator platform.
Connect electrical connector (21).
Illustration 4 g00488059
Connect air duct (20) to the cab with screws (19).
Illustration 5 g00488056
Connect air duct (18) inside the cab.
Connect electrical connectors (17) in the electrical connector's original locations.
Illustration 6 g00488053
Place cover (15) in position in the cab.
Install the washers and bolts (16) that secure the cover.
Illustration 7 g00488052
Place cover (8) in position in the cab.
Connect hose (14) to the cover. Install hose clamp (13) in order to secure the hose to the cover.
Illustration 8 g00488049
Place electrical connectors (11) in position on cover (8).
Install the bolt, the washer, and nut (12) that secures the electrical connectors to the cover.
Illustration 9 g00488046
Install the screws that secure cover (8) to the rear of the cab.
Place cover (6) in position in the cab. Install screws (9) that secure the cover.
Illustration 10 g00488045
Install screws (7) in cover (6).
Illustration 11 g00488041
Install air duct (5).
Illustration 12 g00488018
Place cover (4) in position in the cab. Install screws (3) that hold the cover in position.
Illustration 13 g00488012
Install the rubber floormat in the cab.
Place guard (2) in position on the cab. Install screws (1) that hold the guard in position.