3096158 DRIVE AS-FAN Caterpillar parts
D5N
Rating:
Alternative (cross code) number:
CA3096158
309-6158
3096158
CA3096158
309-6158
3096158
Weight: 10 pounds 4 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hacus - Forklift FPE370445 Plate Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
309-6158 3096158 Fan Clutch Compatible with E320d E320c Excavator
DJCXYSM Product Name:Fan Clutch || Part Number:309-6158 3096158 || Application:Compatible with E320d E320c Excavator || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tip: If you have any questions before or after sale please contact us in time. We'll help you out as soon as possible.
DJCXYSM Product Name:Fan Clutch || Part Number:309-6158 3096158 || Application:Compatible with E320d E320c Excavator || NOTE: To avoid unnecessary returns please check the part number before purchasing or tell us the picture of your engine model and nameplate to reduce the error rate. || Tip: If you have any questions before or after sale please contact us in time. We'll help you out as soon as possible.
$14.70
26 Apr 2021
0.06[0.03] Pounds
US: Legacy Truck Ce
Sylvania Bulb 3156 12.8 Volt 2.10 AmpSold as pack of 10 Bulbs
SYLVANIA 12.8 VOLT 2.10 AMP *Pack of 10* || Cross to: OSR 3156 || Sylvania 3156
SYLVANIA 12.8 VOLT 2.10 AMP *Pack of 10* || Cross to: OSR 3156 || Sylvania 3156
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 3096158:
Information:
Parts Required
The following chart is for ordering the total parts required for a Global Positioning System Interface Module installation. Customer (OEM) wiring and optional features are recommended. NO additional connections are allowed to any wires detailed and described in this publication without Caterpillar Inc. approval. GPS Interface Module Dimensions
Figure 39 - GPS Interface Module Mounting DimensionsMounting Considerations
The installation can be customized to fit the vessel aesthetics, however, the package can not be modified in any fashion.* Four mounting holes are provided on the flange.* Secure the interface module (GPSIM) as close as possible to the display. Wiring between the GPSIM and display must be no greater than 300 mm (12 in).Mount the GPSIM in a location that is protected from exposure to moisture.Environmental Specifications
Operating temperature range: 5 to 40 °C (41 to 104 °F)Storage temperature range: -25 to 60 °C (7 to 140 °F)Humidity: 0 to 100%GPS Interface Module Battery Connections
The GPS Interface Module (GPSIM) can be used with an Engine Vision or Engine Monitoring System (EMS) display. The GPSIM has a 24 VDC power requirement. If a 12 VDC electrical system is used, the GPSIM requires a 12 VDC to 24 VDC converter. Use 5A circuit protection on the 24 VDC +Battery supply to the module.
Figure 40 - GPS Power Connections1. Connect the PORT Engine Power Switch to the 7C2668 Diode Block pin-6.2. Connect the STBD Engine Power Switch to the 7C2668 Diode Block pin-5.3. Connect the 7C2668 Diode Block pin-1 and pin-2 to the +V input of the 12/24 volt converter (12 VDC vessel electrical systems ONLY).4. Connect the 24 VDC output to the +B terminal on the GPSIM. For 24 VDC systems connect pin-1 and pin-2 to the +B terminal on the GPSIM.5. Connect the 24 VDC output to the common terminal of a SPST switch.6. Connect the -Battery Bus Bar to the -B terminal on the GPSIM.Connect Data Link To GPS Interface Module
Figure 41 - CAT Data Link ConnectionsGPS Interface Module Data Link Connections
Refer to the table below for the proper pin numbers for your engine arrangement. 1. Connect the PORT ECM pin for CAT Data Link- to the STBD ECM pin for CAT Data Link-.2. Connect the PORT ECM pin for CAT Data Link+ to the STBD ECM pin for CAT Data Link+.3. Connect the Customer Connector pin for CAT Data Link- to the CAT Data Link- terminal on the GPSIM.4. Connect the Customer Connector pin for CAT Data Link+ to the CAT Data Link+ terminal on the GPSIM. Use 143-5018 Data Link Cable for the CAT Data Link connections. The TOTAL cable length should not exceed 30 m (100 ft).Connect GPS Interface Module To The Vessel GPS Receiver
Figure 42 - GPS Receiver to Interface Module Connections 1. Connect the GPS Receiver Data Output (Data Transmit) Signal line to the GPS Interface Module DB-25 connector pin-3.2. Connect the GPS Receiver Signal Ground to the GPS DB-25 connector pin-7.3. Connect pin-8 to pin-20 on the GPSIM DB-25 connector. Set the GPS receiver to (NEMA
The following chart is for ordering the total parts required for a Global Positioning System Interface Module installation. Customer (OEM) wiring and optional features are recommended. NO additional connections are allowed to any wires detailed and described in this publication without Caterpillar Inc. approval. GPS Interface Module Dimensions
Figure 39 - GPS Interface Module Mounting DimensionsMounting Considerations
The installation can be customized to fit the vessel aesthetics, however, the package can not be modified in any fashion.* Four mounting holes are provided on the flange.* Secure the interface module (GPSIM) as close as possible to the display. Wiring between the GPSIM and display must be no greater than 300 mm (12 in).Mount the GPSIM in a location that is protected from exposure to moisture.Environmental Specifications
Operating temperature range: 5 to 40 °C (41 to 104 °F)Storage temperature range: -25 to 60 °C (7 to 140 °F)Humidity: 0 to 100%GPS Interface Module Battery Connections
The GPS Interface Module (GPSIM) can be used with an Engine Vision or Engine Monitoring System (EMS) display. The GPSIM has a 24 VDC power requirement. If a 12 VDC electrical system is used, the GPSIM requires a 12 VDC to 24 VDC converter. Use 5A circuit protection on the 24 VDC +Battery supply to the module.
Figure 40 - GPS Power Connections1. Connect the PORT Engine Power Switch to the 7C2668 Diode Block pin-6.2. Connect the STBD Engine Power Switch to the 7C2668 Diode Block pin-5.3. Connect the 7C2668 Diode Block pin-1 and pin-2 to the +V input of the 12/24 volt converter (12 VDC vessel electrical systems ONLY).4. Connect the 24 VDC output to the +B terminal on the GPSIM. For 24 VDC systems connect pin-1 and pin-2 to the +B terminal on the GPSIM.5. Connect the 24 VDC output to the common terminal of a SPST switch.6. Connect the -Battery Bus Bar to the -B terminal on the GPSIM.Connect Data Link To GPS Interface Module
Figure 41 - CAT Data Link ConnectionsGPS Interface Module Data Link Connections
Refer to the table below for the proper pin numbers for your engine arrangement. 1. Connect the PORT ECM pin for CAT Data Link- to the STBD ECM pin for CAT Data Link-.2. Connect the PORT ECM pin for CAT Data Link+ to the STBD ECM pin for CAT Data Link+.3. Connect the Customer Connector pin for CAT Data Link- to the CAT Data Link- terminal on the GPSIM.4. Connect the Customer Connector pin for CAT Data Link+ to the CAT Data Link+ terminal on the GPSIM. Use 143-5018 Data Link Cable for the CAT Data Link connections. The TOTAL cable length should not exceed 30 m (100 ft).Connect GPS Interface Module To The Vessel GPS Receiver
Figure 42 - GPS Receiver to Interface Module Connections 1. Connect the GPS Receiver Data Output (Data Transmit) Signal line to the GPS Interface Module DB-25 connector pin-3.2. Connect the GPS Receiver Signal Ground to the GPS DB-25 connector pin-7.3. Connect pin-8 to pin-20 on the GPSIM DB-25 connector. Set the GPS receiver to (NEMA
Caterpillar parts catalog:
Parts drive Caterpillar catalog:
1892223
DRIVE GP-FAN
561N, 953C, 963C, D5N, D6N
561N, 953C, 963C, D5N, D6N
1892203
DRIVE GP-FAN
561N, 953C, 963C, D5N, D6N
561N, 953C, 963C, D5N, D6N
1961863
DRIVE GP-FINAL
561N, D5N
561N, D5N
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140G, 140K, 140K 2, 160K, 214B, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
3096161
DRIVE AS-FAN
963C
963C
7B4038
DRIVE SCREW
955L
955L
594H, 657B
D6N LGP
3096160
DRIVE AS-FAN
953C
953C