3142718 DRIVE GP-FAN Caterpillar parts
C7
Rating:
Alternative (cross code) number:
CA3142718
314-2718
3142718
CA3142718
314-2718
3142718
INDUSTRIAL ENGINE,
Compatible equipment models: 3142718:
Number on catalog scheme:
For full view, you need register
Information:
Cleanliness of the Engine
Extreme cleanliness must be maintained when working on the fuel system, since even tiny particles can cause engine or fuel system problems.
The entire engine should be washed with a high-pressure water system. The high-pressure water system will remove dirt and loose debris before starting a repair on the fuel system. Ensure that no high-pressure water is directed at the injectors.Environment
When possible, the service area must be positively pressurized. Ensure that the components are not exposed to contamination from airborne dirt and debris. When a component is removed from the system, the exposed fuel connections must be closed off immediately with suitable sealing plugs. The sealing plugs should only be removed when the component is reconnected. The sealing plugs must not be reused. Dispose of the sealing plugs immediately after use. Contact your nearest Caterpillar Dealer in order to obtain the correct sealing plugs.New Components
The fuel injection lines are not reusable. New fuel injection lines are manufactured for installation in one position only. When a fuel injection line is replaced, do not bend or distort the new line. Internal damage to the pipe may cause metallic particles to be introduced to the fuel.All new fuel filters, fuel injection lines, tube assemblies, and components are supplied with sealing plugs. These sealing plugs should only be removed in order to install the new part. If the new component is not supplied with sealing plugs then the component should not be used. The technician must wear suitable rubber gloves. The rubber gloves should be disposed of immediately after completion of the repair in order to prevent contamination of the system.Refueling
In order to refuel the diesel fuel tank, the refueling pump and the fuel tank cap assembly must be clean and free from dirt and debris. Refueling should take place only when the ambient conditions are free from dust, wind, and rain. Only use fuel, free from contamination, that conforms to the specifications in the Operation and Maintenance Manual, "Fluid Recommendations" Fuel Specifications.
Extreme cleanliness must be maintained when working on the fuel system, since even tiny particles can cause engine or fuel system problems.
The entire engine should be washed with a high-pressure water system. The high-pressure water system will remove dirt and loose debris before starting a repair on the fuel system. Ensure that no high-pressure water is directed at the injectors.Environment
When possible, the service area must be positively pressurized. Ensure that the components are not exposed to contamination from airborne dirt and debris. When a component is removed from the system, the exposed fuel connections must be closed off immediately with suitable sealing plugs. The sealing plugs should only be removed when the component is reconnected. The sealing plugs must not be reused. Dispose of the sealing plugs immediately after use. Contact your nearest Caterpillar Dealer in order to obtain the correct sealing plugs.New Components
The fuel injection lines are not reusable. New fuel injection lines are manufactured for installation in one position only. When a fuel injection line is replaced, do not bend or distort the new line. Internal damage to the pipe may cause metallic particles to be introduced to the fuel.All new fuel filters, fuel injection lines, tube assemblies, and components are supplied with sealing plugs. These sealing plugs should only be removed in order to install the new part. If the new component is not supplied with sealing plugs then the component should not be used. The technician must wear suitable rubber gloves. The rubber gloves should be disposed of immediately after completion of the repair in order to prevent contamination of the system.Refueling
In order to refuel the diesel fuel tank, the refueling pump and the fuel tank cap assembly must be clean and free from dirt and debris. Refueling should take place only when the ambient conditions are free from dust, wind, and rain. Only use fuel, free from contamination, that conforms to the specifications in the Operation and Maintenance Manual, "Fluid Recommendations" Fuel Specifications.
Caterpillar SIS machinery equipment:
Parts drive Caterpillar catalog:
2180360
DRIVE GP-FAN
3126E, C7
3126E, C7
3116, 3126, 3126B, 3126E, 35, 45, 55, AP-1200, C7
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140G, 140K, 140K 2, 160K, 214B, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
3186150
DRIVE GP-ACCESSORY
C15, TH35-C15T
C15, TH35-C15T
3678295
DRIVE GP-FINAL
324D, 324D L
324D, 324D L
3678291
DRIVE GP-FINAL
323D SA, 325D L, 329D
323D SA, 325D L, 329D
3530493
DRIVE GP-FINAL
323D SA, 323E L, 325D L, 329D, 329E L, 329E LN
323D SA, 323E L, 325D L, 329D, 329E L, 329E LN
3678297
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
3678296
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
3530671
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
3332919
DRIVE GP-FINAL
324D, 324D L, 324D LN, 324E LN
324D, 324D L, 324D LN, 324E LN
2750435
DRIVE GP-FINAL
319D, 319D LN, 323D L, 323D LN
319D, 319D LN, 323D L, 323D LN