3332919 DRIVE GP-FINAL Caterpillar parts
324D, 324D L, 324D LN, 324E LN
Rating:
Alternative (cross code) number:
CA3332919
333-2919
3332919
CA3332919
333-2919
3332919
EXCAVATOR,
Number on catalog scheme:
1
For full view, you need register
Information:
Speed of the work tool is fast during a single operation
The following adjustments can be performed.
Pump flow to the work tool may need adjustment.
The appropriate flow setting for the work tool may be too high. Decrease the value of the following parameter until the desired work tool speed is met. "Atch #1 Flow Setting" (Parameter # 27) - XXX [L/min]
Spool shift pressure for the attachment control valve may need adjustment for a single operation.
The value of this parameter may be too high. Decrease the value of the following parameters until the desired work tool speed is met. "Atch #X Max Ext Press" (Parameter #30, #40, and #50) - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000 kPa.Speed of the work tool is fast during a multiple operation
The following adjustments can be performed when the speed of the work tool is fast while operated along with a boom, stick, bucket, swing, or travel function.
Pump flow to the work tool during multiple operations may need adjustment.
The multiple operation flow setting for the work tool may be too high. Decrease the value of the following parameter until the desired work tool speed is met. "Atch #1 Multi-Ope Add Flow" (Parameter # 28) - XXX [L/min]
Spool shift pressure for the attachment control valve may need adjustment for a multiple operation.
The value of this parameter may be too high. Decrease the value of the following parameters until the desired work tool speed is met. "Atch #X M-Ope Max Ext Press" (Parameter #32 and #42) - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000 kPa.
The parameter values for the enhanced multiple operation may need adjustment. Note: This parameter setting is only available when "Multi Ope Atch Valve Limit" (Parameter # 14) is Enabled.Note: This adjustment procedure is effective for only multiple operation with Boom UP, Stick OUT, and Swing.
The parameter values for the enhanced multiple operation may be too high. Decrease the value of the following parameters until the desired work tool speed is met. "Single Mode Max Ext Press" (Parameter #15) - XXXX [kPa]Set this parameter within the following range.
"Single Mode Max Ext Press" (Parameter #15) greater than or equal to "Atch #X M-Ope Max Ext" (Parameter #30 and #40)
"Single Mode Max Ext Press" (Parameter #15) less than or equal to "Atch #X M-Ope Max Ext" (Parameter #32 and #42)Speed of the work tool is slow during a single operation
The following adjustments can be performed.
Pump flow to the work tool may need adjustment.
The appropriate flow setting for the work tool may
The following adjustments can be performed.
Pump flow to the work tool may need adjustment.
The appropriate flow setting for the work tool may be too high. Decrease the value of the following parameter until the desired work tool speed is met. "Atch #1 Flow Setting" (Parameter # 27) - XXX [L/min]
Spool shift pressure for the attachment control valve may need adjustment for a single operation.
The value of this parameter may be too high. Decrease the value of the following parameters until the desired work tool speed is met. "Atch #X Max Ext Press" (Parameter #30, #40, and #50) - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000 kPa.Speed of the work tool is fast during a multiple operation
The following adjustments can be performed when the speed of the work tool is fast while operated along with a boom, stick, bucket, swing, or travel function.
Pump flow to the work tool during multiple operations may need adjustment.
The multiple operation flow setting for the work tool may be too high. Decrease the value of the following parameter until the desired work tool speed is met. "Atch #1 Multi-Ope Add Flow" (Parameter # 28) - XXX [L/min]
Spool shift pressure for the attachment control valve may need adjustment for a multiple operation.
The value of this parameter may be too high. Decrease the value of the following parameters until the desired work tool speed is met. "Atch #X M-Ope Max Ext Press" (Parameter #32 and #42) - XXXX [kPa]Note: For reference, this parameter is set within the range of 800 kPa to 2000 kPa.
The parameter values for the enhanced multiple operation may need adjustment. Note: This parameter setting is only available when "Multi Ope Atch Valve Limit" (Parameter # 14) is Enabled.Note: This adjustment procedure is effective for only multiple operation with Boom UP, Stick OUT, and Swing.
The parameter values for the enhanced multiple operation may be too high. Decrease the value of the following parameters until the desired work tool speed is met. "Single Mode Max Ext Press" (Parameter #15) - XXXX [kPa]Set this parameter within the following range.
"Single Mode Max Ext Press" (Parameter #15) greater than or equal to "Atch #X M-Ope Max Ext" (Parameter #30 and #40)
"Single Mode Max Ext Press" (Parameter #15) less than or equal to "Atch #X M-Ope Max Ext" (Parameter #32 and #42)Speed of the work tool is slow during a single operation
The following adjustments can be performed.
Pump flow to the work tool may need adjustment.
The appropriate flow setting for the work tool may
Caterpillar SIS machinery equipment:
Caterpillar SIS
324D L & LN Excavator EJC00001-UP (MACHINE) POWERED BY C-7 Engine »
333-2919
DRIVE GP-FINAL
324D L Excavator T2D00001-UP (MACHINE) POWERED BY C-7 Engine »
333-2919
DRIVE GP-FINAL
324D L & 324D LN Excavators BTK00001-UP (MACHINE) POWERED BY C7 Engine »
333-2919
DRIVE GP-FINAL
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 Engine »
333-2919
DRIVE GP-FINAL
Caterpillar parts catalog:
Parts drive Caterpillar catalog:
3530671
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
3678296
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
3678297
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
324D, 324D L, 324E, 324E L, 324E LN, 326D L
324D L, 324E, 324E L, 324E LN
1150, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 1676, 215, 215B, 225, 227, 235, 235D, 30/30, 3116, 3126, 3126...
214B, 224B, 3116, 3126, 3126B, 320 L, 320B, 322, 322B L, 322B LN, 322C, 322C FM, 324D, 324D LN, 325, 325B, 325B L, 325C, 325C FM, 325D, 325D L, 533, 539, 543, 613C II, 950F, 953C, 963B, 963C, AP-1000B...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140G, 140K, 140K 2, 160K, 214B, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
3219994
DRIVE AS-FAN
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, C7.1
320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D2 L, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, C7.1
324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 328D LCR, 329D, 329D L, 329D LN, M325D L MH, M325D MH
2653577
DRIVE AS-FAN
324D, 324D LN, 325D, M325D L MH, M325D MH
324D, 324D LN, 325D, M325D L MH, M325D MH
3563248
DRIVE AS-FAN
324E L, 324E LN, 329E, 329E L, 329E LN
324E L, 324E LN, 329E, 329E L, 329E LN
2750435
DRIVE GP-FINAL
319D, 319D LN, 323D L, 323D LN
319D, 319D LN, 323D L, 323D LN
3186150
DRIVE GP-ACCESSORY
C15, TH35-C15T
C15, TH35-C15T
3678295
DRIVE GP-FINAL
324D, 324D L
324D, 324D L
2869131
DRIVE GP-FINAL
587R, 587T
587R, 587T
2488349
DRIVE GP-FINAL
587R, 587T
587R, 587T
2648755
DRIVE GP-PUMP
320D LRR, 320D RR
320D LRR, 320D RR
3678297
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
3678296
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN
3530671
DRIVE GP-FINAL
324D, 324D L, 324D LN
324D, 324D L, 324D LN