DRIVE GP 3358622 - Caterpillar

Illustration 1 g02559957
Typical example
Table 1
Specification for 6Y-5323 Track Carrier Roller, 300-4545 Track Carrier Roller, 449-2274 Track Carrier Roller and 134-3010 Track Carrier Roller
Item Qty Part Specification Description
1 1 - The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.
2 1 6Y-9856 Carrier Roller Bearing Inside diameter after assembly is 47.96 0.09 mm (1.888 0.004 inch).
3 1 6Y-9855 Carrier Roller Bearing Inside diameter after assembly is 47.96 0.09 mm (1.888 0.004 inch).
A - - End play:
Minimum is 0.25 mm (0.010 inch).
Maximum is 1.25 mm (0.049 inch).
4 1 - Lubricate the bore of the O-ring seal lightly with the lubricant that is being sealed.
B 1 6Y-9858 Track Roller Shaft Assembly Length of the track roller shaft assembly that must be free of paint before assembly is 67 5 mm (2.6 0.2 inch).