DRIVE GP-ACCESSORY 3498421 - Caterpillar

Table 1
Required Tools    
Description    Qty    
Stopwatch     1    
Scale
150 mm (6 inch)     1    
Illustration 1 g00297342
Place the machine on a slope of 12 degrees. The surface of the slope must be hard and smooth.
Position the implements, as shown. Refer to Illustration 1.
The bucket should be empty.
Illustration 2 g00297498
To indicate the relative position of the machine to the slope, put a mark on both the track and the track roller frame. Refer to Illustration 2.
Stop the engine.
Measure the machine movement on the slope after 3 minutes.
Table 2
Travel Drift    
Slope
(deg)     Time
(min)     Travel Drift
(mm)(inch)    
12     3     0