DRIVE GP- 3675154 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the gasket. Replace the gaskets, if necessary.
Illustration 1 g00804305
Illustration 2 g00804303
Install the gasket and water pump (2) to the front housing.
Install eight bolts (1) and install two bolts (3) that fasten the water pump (2) to the front housing.
Tighten hose clamp (4) .
Fill the cooling system. If the engine uses diesel engine antifreeze/coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change". If the engine uses extended life coolant, refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".