DRIVE GP-SWING 3715702 - Caterpillar

Illustration 1 g03586777
Table 1
Specifications for 389-6062 Steering Cylinder Gp
Item Qty Part Specification Description
1 1 8T-9102 Socket Setscrew Before assembly, apply red Loctite 271 to the threads.
Torque to 3.3 0.7 N m (29.2 6.2 lb in).
2 1 9S-8002 O-Ring Plug Torque to 26 3 N m (230 27 lb in).
3 1 383-7670 Piston Diameter (B) is 75.69 0.03 mm (2.980 0.001 inch).
Torque to 1500 125 N m (1106 92 lb ft)
C 1 389-6077 Steering Cylinder Bore is 76.20 0.08 mm (3.000 0.003 inch).
D 1 389-6078 Rod As Diameter is 50.750 0.038 mm (1.9980 0.0015 inch).
4 - 151-7038 Head Bore over four lands (E) is 51.13 0.03 mm (2.013 0.001 inch).
Before assembly, lubricate the threads with clean grease.
Torque to 600 130 N m (443 96 lb ft).
5 2 350-3842 Setscrew Torque to 25 3 N m (221 27 lb in).
6 1 289-2935 Buffer Seal As Lubricate the sealing lips lightly with the lubricant that is being sealed.
7 1 289-2946 U-Cup Seal Lubricate the sealing lips lightly with the lubricant that is being sealed.
8 1 308-1845 Wiper Seal Lubricate the sealing lips lightly with the lubricant that is being sealed.
9 - - Before assembly, apply green Loctite 609 to the wiper seal grooves.
10 1 217-3312 Magnet Before assembly, apply sealant to the threads.
11 1 376-8250 Wave Spring Before assembly, apply sealant to the threads.