DRIVE GP-FINAL 4171103 - Caterpillar

4171103 DRIVE GP-FINAL Caterpillar parts 308E2 CR

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

WIDIA DNMG432UR WP15CT Victory DNMG-UR High Performance Turning Inserts, Carbide, 0.031" / 0.8mm Radius, Universal Roughing, Grade WP15CT

$39.84

25 Jul 2024
0.03[0.01] Pounds
Amazon.com

WIDIA DNMG432UR WP15CT Victory DNMG-UR High Performance Turning Inserts, Carbide, 0.031" / 0.8mm Radius, Universal Roughing, Grade WP15CT
WIDIA New grade technology allows higher productivity through increased speed capability || Post-coat treatments improve edge toughness, reduce depth-of-cut notching and provide long and predictable tool life || Improved chip control and reduced crater wear due to proprietary chip breakers with varying forms || WP Grades for Steel roughing to finishing || UR Roughing geometry with smooth chip forming and improved coolant flow for increased tool life

$38.39

09 Jul 2024
0.03[0.01] Pounds
Amazon.com

WIDIA DNMG432UR WP15CT Victory DNMG-UR High Performance Turning Inserts, Carbide, 0.031" / 0.8mm Radius, Universal Roughing, Grade WP15CT
WIDIA New grade technology allows higher productivity through increased speed capability || Post-coat treatments improve edge toughness, reduce depth-of-cut notching and provide long and predictable tool life || Improved chip control and reduced crater wear due to proprietary chip breakers with varying forms || WP Grades for Steel roughing to finishing || UR Roughing geometry with smooth chip forming and improved coolant flow for increased tool life

$41.70

13 Jun 2024
0.03[0.01] Pounds
Amazon.com

WIDIA DNMG432UR WP15CT Victory DNMG-UR High Performance Turning Inserts, Carbide, 0.031" / 0.8mm Radius, Universal Roughing, Grade WP15CT
WIDIA New grade technology allows higher productivity through increased speed capability || Post-coat treatments improve edge toughness, reduce depth-of-cut notching and provide long and predictable tool life || Improved chip control and reduced crater wear due to proprietary chip breakers with varying forms || WP Grades for Steel roughing to finishing || UR Roughing geometry with smooth chip forming and improved coolant flow for increased tool life

Compatible equipment models: 4171103:

MINI HYD EXCAVATOR 308E2 CR Caterpillar

Information:

System Operation Description:Use this procedure under the following situation:Use this procedure to determine that the vehicle wiring and the Engine Control Module (ECM) are functioning properly for the features of dedicated PTO.The following background information is related to this procedure:INPUT 1P1-56 Input 1 is used for the circuit for the PTO On/Off switch when the PTO configuration is programmed to "Cab Switches", "Remote Switches", or "Remote Throttle".When the PTO On/Off switch is on, the ECM will be in dedicated PTO mode.When the ECM is in the dedicated PTO mode the PTO Top Engine Limit (TEL) is activated. The engine may proceed directly to the PTO engine rpm set speed if the parameter is programmed. If a PTO switch on lamp is connected to the P1-30 Output 1, the PTO switch on lamp will turn on whenever the PTO On/Off circuit is on.If the problem is with undetermined PTO kickouts, use the following procedure:Operate the vehicle in PTO mode.After the kickout, review the status parameter on Caterpillar Electronic Technician (ET). The status parameter indicates the cause of the kickout. This must be performed before the ignition key switch is turned off. It is important to remember that the parameter will only indicate the last kickout since the ECM has been powered by the ignition key switch.This parameter is blank when the ECM is first powered up. If this parameter is blank "Not Kicked Out" is indicated. This parameter remains blank until the ECM detects the use of the PTO mode. Also, this parameter remains blank until the ECM detects the disengagement of PTO mode. Refer to Table 1 in order to interpret the status parameter.The following kickout status parameter is available:
PTO kickoutPTO interlocks may also be connected in series with the PTO On/Off switch. The interlocks are intended to prevent the PTO On/Off circuit from activating unless certain conditions are met.INPUT 2P1-58 Input 2 is used for the PTO set switch when the "PTO Configuration" is programmed to "Remote