4182232 DRIVE AS-FAN Caterpillar parts
Rating:
Alternative (cross code) number:
CA4182232
418-2232
4182232
CA4182232
418-2232
4182232
Weight: 20 pounds 9 kg.
You can buy:
US$668.99
29 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Cooling Fan Clutch 、Compatible With Excavator 336D2 340D2 Engine C9 418-2232 4182232
CYTYZERA Rapid cooling: Fan clutch cooling, rapid cooling to prevent engine overheating, silent cold engine, powerful high-temperature cooling || Extending engine life: The engine cooling fan clutch precisely controls the engine temperature to reduce engine overheating and wear, thereby extending the engine's service life || Fuel saving and energy conservation: The engine fan clutch assembly reduces the engine load and improves fuel efficiency || Silent operation: The low-noise design of the fan clutch makes driving more comfortable || Cooling Fan Clutch 、Compatible With Excavator 336D2 340D2 Engine C9 418-2232 4182232
CYTYZERA Rapid cooling: Fan clutch cooling, rapid cooling to prevent engine overheating, silent cold engine, powerful high-temperature cooling || Extending engine life: The engine cooling fan clutch precisely controls the engine temperature to reduce engine overheating and wear, thereby extending the engine's service life || Fuel saving and energy conservation: The engine fan clutch assembly reduces the engine load and improves fuel efficiency || Silent operation: The low-noise design of the fan clutch makes driving more comfortable || Cooling Fan Clutch 、Compatible With Excavator 336D2 340D2 Engine C9 418-2232 4182232
4182232 Drive AS-Fan (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 23.65 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 23.65 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
4182232 Drive AS-Fan (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 23.65 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 23.65 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1098 Lifting Eye Assembly 1
B 8T-0914 Guide Pin 2
C 5P-0256 Forcing Bolts 4
D - Loctite Graphite-50 Anti-Seize Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Disconnect the drive coupling from the flywheel.
Illustration 1 g03378961
Disconnect sensor bracket assembly (3) and reposition. Remove guard assembly (1) and guard assembly (2).
Illustration 2 g03378963
Illustration 3 g03378964
Turn the crankshaft until the dash marks on the crankshaft and the flywheel face upward. This action will place the 3/4 inch tapped hole for Tooling (A) at the top of the flywheel.
Do not use the timing pin in order to hold the crankshaft while loosening the flywheel bolts. Remove the two front opposite crankcase inspection covers, and place a 102 mm (4 inch) by 102 mm (4 inch) board under the connecting rod in order to keep the crankshaft from turning.
Remove two bolts (4). Install Tooling (B).
Attach Tooling (A) and a suitable lifting device to flywheel (5). The weight of flywheel (5) is approximately 789 kg (1740 lb). Remove the remaining bolts (4).
Use Tooling (C) to reposition flywheel (5) onto Tooling (B). Remove flywheel (5).
Illustration 4 g03378965
Remove blots (6) and ring gear (7) from flywheel (5). Installation Procedure
Install flywheel (5) and ring gear (7) in the reverse order of removal.
Install ring gear (7) onto flywheel (5) with the tooth chamfer orientated toward the front of the engine.
Align the mark on flywheel (5) with the dash mark on the crankshaft. There are four unequally spaced holes on the back of flywheel (5). These holes give clearance for the heads of the bolts that hold the seal adapter to the crankshaft. Be sure that the bolts are aligned with the holes.
Apply Tooling (D) to the threads and mating surface of bolts (4). Tighten bolts (4) to a torque of 800 80 N m (590 60 lb ft). Turn bolts (4) an additional 90 + 2 - 5 degrees.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 395-1098 Lifting Eye Assembly 1
B 8T-0914 Guide Pin 2
C 5P-0256 Forcing Bolts 4
D - Loctite Graphite-50 Anti-Seize Lubricant -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Disconnect the drive coupling from the flywheel.
Illustration 1 g03378961
Disconnect sensor bracket assembly (3) and reposition. Remove guard assembly (1) and guard assembly (2).
Illustration 2 g03378963
Illustration 3 g03378964
Turn the crankshaft until the dash marks on the crankshaft and the flywheel face upward. This action will place the 3/4 inch tapped hole for Tooling (A) at the top of the flywheel.
Do not use the timing pin in order to hold the crankshaft while loosening the flywheel bolts. Remove the two front opposite crankcase inspection covers, and place a 102 mm (4 inch) by 102 mm (4 inch) board under the connecting rod in order to keep the crankshaft from turning.
Remove two bolts (4). Install Tooling (B).
Attach Tooling (A) and a suitable lifting device to flywheel (5). The weight of flywheel (5) is approximately 789 kg (1740 lb). Remove the remaining bolts (4).
Use Tooling (C) to reposition flywheel (5) onto Tooling (B). Remove flywheel (5).
Illustration 4 g03378965
Remove blots (6) and ring gear (7) from flywheel (5). Installation Procedure
Install flywheel (5) and ring gear (7) in the reverse order of removal.
Install ring gear (7) onto flywheel (5) with the tooth chamfer orientated toward the front of the engine.
Align the mark on flywheel (5) with the dash mark on the crankshaft. There are four unequally spaced holes on the back of flywheel (5). These holes give clearance for the heads of the bolts that hold the seal adapter to the crankshaft. Be sure that the bolts are aligned with the holes.
Apply Tooling (D) to the threads and mating surface of bolts (4). Tighten bolts (4) to a torque of 800 80 N m (590 60 lb ft). Turn bolts (4) an additional 90 + 2 - 5 degrees.
Caterpillar parts catalog:
Parts drive Caterpillar catalog:
3515320
DRIVE GP-FINAL
Caterpillar
Caterpillar
5689418
DRIVE GP-FINAL
Caterpillar
Caterpillar
5689416
DRIVE GP-FINAL
Caterpillar
Caterpillar
5689415
DRIVE GP-FINAL
Caterpillar
Caterpillar
5689414
DRIVE GP-FINAL
Caterpillar
Caterpillar
5566119
DRIVE GP-ROTOR
Caterpillar
Caterpillar
4883771
DRIVE AS-CLUTCH
Caterpillar
Caterpillar
4796994
DRIVE GP-SWING
Caterpillar
Caterpillar
4796993
DRIVE GP-SWING
Caterpillar
Caterpillar
4429612
DRIVE GP-FAN
Caterpillar
Caterpillar
4429606
DRIVE GP-ACCESSORY
Caterpillar
Caterpillar
4187154
DRIVE GP-SWING
Caterpillar
Caterpillar