DRIVE & MOTOR GP-SWING 4310302 - Caterpillar

Removal Procedure
Start By:
Install the body retaining pin.
Illustration 1 g01322545
Disconnect hose assemblies (3) and (4). Remove bolts (1), cover (2), and the gasket.
Illustration 2 g01322901
Disconnect harness assembly (7). Remove nut (5) from harness assembly (6).
Illustration 3 g01322558
Reposition harness assembly (6). Remove hose assemblies (8).
Illustration 4 g01322937
Remove clip (12) and reposition tube (11).
Remove tubes (10) and tube (14).
Remove four bolts (9) and bolt (15). Remove hydraulic control valve (13). Installation Procedure
Install hydraulic control valve (13) in the reverse order of removal.
Tighten hose assemblies (8) to a torque of 25 3 N m (18 2 lb ft).
Tighten nut (5) to a torque of 9 1 N m (80 9 lb in).