DRIVE GP-FINAL 5116009 - Caterpillar

Assembly Procedure
Illustration 1 g02241176
Install the O-ring seals and plugs (36). Tighten plugs (36) to a torque of 10 1 N m (89 9 lb in).
Illustration 2 g02241175
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Note: Lubricate the O-ring seals and the backup rings with lubricant that is being sealed.
Install O-ring seal (35) onto body (34) .
Install O-ring seal (31) and backup rings (32) onto valve (30) .
Install O-ring seal (24), backup rings (25), and O-ring seal (26) onto body (23) .
Install O-ring seal (20) onto screw (19) .
Install valve (33), valve (30), plunger (29), spring (28), spring (27), body (23), plunger (22), spring (21), screw (19), and nut (18) into body (34). Tighten body (23) to a torque of 59 6 N m (44 4 lb ft). Tighten nut (18) to a torque of 20 2 N m (177 18 lb in).
Illustration 3 g02241174
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install backup ring (14) and O-ring seal (15) onto cover (13) .
Install valve (17), spring (16), cover (13), and bolts (12). Tighten bolts (12) to a torque of 55 10 N m (41 7 lb ft).
Illustration 4 g02241173
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install piston (4), O-ring seal (3), cover (2), and bolts (1). Tighten bolts (1) to a torque of 28 7 N m (21 5 lb ft).
Install spool assembly (5), retainer (6), spring (7), O-ring seal (8), cover (9), and bolts (10). Tighten bolts (10) to a torque of 28 7 N m (21 5 lb ft).End By: Install the load control valve (stick cylinder).