DRIVE GP-FINAL 5130983 - Caterpillar

1. Remove two nuts (2) and shield (1) from engine. 2. Remove two spacers (4) and six nuts from exhaust manifold.3. Remove the exhaust manifold (3) and gaskets from engine.Install Exhaust Manifold (Industrial Engine)
1. If the exhaust manifold studs are loose or a replacement is necessary, put 5P3931 Anti-Seize Compound on the threads of the studs and tighten to a torque of 20 3 lb.ft. (25 4 N m). 2. Make a replacement of the gaskets (2).3. Put 5P3931 Anti-Seize Compound on the bolt threads and install manifold (1) in position on the cylinder head. Tighten nut to torque of 32 3 lb.ft. (45 4 N m). 4. Put spacers (4) and shield (3) in position and install the nuts and tighten to a torque of 32 3 lb.ft. (45 4 N m).end by:a) install turbochargerRemove Exhaust Manifold (Marine Engine)
start by:a) remove turbochargerb) remove fuel lines 1. Disconnect line (2) to expansion tank. Remove two bolts and tube assembly (1) from exhaust manifold. 2. Remove bolt (3) and clip (4) from the bottom of the exhaust manifold. 3. Fasten a hoist and tooling (A) on the exhaust manifold.4. Remove bolts and exhaust manifold (5) from engine. Weight of the exhaust manifold is 100 lb. (45 kg).Install Exhaust Manifold (Marine Engine)
1. Make sure the exhaust manifold studs are tightened to a torque of 20 3 lb.ft. (27 4 N m) in the cylinder head.2. Make a replacement of gaskets. 3. Put 5P3931 Anti-Seize Compound on the threads of the studs and nuts for the manifold. Fasten a hoist and tooling (A) to the manifold, and put manifold (1) in position on the cylinder head and tighten nuts to a torque of 32 3 lb.ft. (45 4 N m). 4. Inspect gasket on tube assembly and make a replacement if damaged. Install tube assembly (2) or manifold and tube (3) in place on expansion tank.5. Install the clip on the fuel ratio control tube to the exhaust manifold.