DRIVE GP- 5433064 - Caterpillar

Illustration 1 g00774447
Remove three bolts (2) that secure nut (1) .
Loosen three bolts (3) .
Remove three cone point setscrews (4) .
Loosen three dog point setscrews (5) .Use the following steps in order to set the preload on the cutting arm.
Install three dog point setscrews (5) into the frame of the shear. Tighten the dog point setscrews to a torque value of 55 10 N m (41 7 lb ft).
Install three cone point setscrews (4) on top of dog point setscrews (5). Tighten the cone point setscrews to a torque value of 55 10 N m (41 7 lb ft).
Install three bolts (2) onto cone point setscrews (4). Tighten the three bolts.
Tighten three bolts (3) to a torque value of 55 10 N m (41 7 lb ft).