DRIVE GP-FINAL 5693505 - Caterpillar

1. Remove fuel line (2). Remove fuel line (1) from the fuel injection pump. Cap and plug all openings immediately. 2. Remove bolt, nut and washer (3). Remove fuel line (4). Cap and plug all openings immediately. 3. Fasten a strap and a suitable lifting device to the fuel injection pump, and remove the nuts that hold the fuel injection pump to the timing gear plate. Remove bolts (5) and (6), and remove fuel injection pump and governor (7) from the engine. The weight of the fuel injection pump and governor is 57 kg (125 lb).5. Remove the three O-ring seals from the fuel injection pump.Install Fuel Injection Pump & Governor
1. Put the three O-ring seals in position on fuel injection pump and governor (1). Put clean engine oil on the O-ring seals.2. Install fuel injection pump and governor (1) on the engine, and install the nuts that hold it to the timing gear plate.3. Install three bolts (2) that hold the fuel injection pump and governor to the cylinder block. 4. Install two lines (4) on the engine. Install fuel line (4) to the fuel injection pump.End By:a. install fuel injection pump and governor drive (marine engine)b. install automatic timing advance (industrial engine)c. install fuel injection lines