DRIVE GP-CIRCLE 6G1925 - Caterpillar

Illustration 4 g02793499
Use 367-7318 Bracket (3) to attach 337-0560 Bracket As (8) to 337-0551 Fender (4). Secure with the following hardware:
Two 7X-0579 Hard Washers (5)
One 131-3540 Locknut (6)
One 8T-4189 Bolt (7)
Illustration 5 g02793858
Attach the 370-4567 Plate (10), 370-4568 Plate (11), and 319-7894 Deflector (9) to 337-0551 Fender (4). Secure with the following hardware:
Seven 131-3540 Locknut (6)
Fourteen 7X-0579 Hard Washers (5)
Seven 8T-7547 Bolt (12) Assembly of 354-4792 Fender Gp (LH)
Illustration 6 g02794031
Use 367-7317 Bracket (16) to attach 354-4786 Bracket As (15) to 337-0552 Fender (14). Secure with the following hardware:
Two 7X-0579 Hard Washers (20)
One 131-3540 Locknut (19)
One 8T-4189 Bolt (21)
Illustration 7 g02794032
Attach the 370-4567 Plate (17), 370-4568 Plate (18), and 319-7895 Deflector (13) to 337-0552 Fender (14). Secure with the following hardware:
Seven 131-3540 Locknut (19)
Fourteen 7X-0579 Hard Washers (20)
Seven 8T-7547 Bolt (22) Installation of Fender Group
Illustration 8 g02794198
Attach the rear fender group to the frame. Secure with the ten 8T-4195 Bolts (1) and 8T-4222 Plated Washers (2) .
Illustration 9 g02794317
Install 354-5867 Plate (23). Secure with the following hardware:
One 7X-7729 Washer (24)
One 8T-0389 Locknut (25)
One 8T-4136 Bolt (26)
One 8T-4226 Plated Washer (27)
Illustration 10 g02794323
Install the 354-4777 Plate (C) and rear fender support assembly. Secure with two 8T-4136 Bolts (A) and four 7X-7729 Washers (B) .
Illustration 11 g02794328
Complete the installation of the rear fender support assembly. Secure with two 8T-4136 Bolts (A) and four 7X-7729 Washers (B) .
Repeat Step 1 through Step 4 for the other side of the machine.