DRIVE GP-POWER TAKE-OFF 6S6707 - Caterpillar

3304 Engine Shown1. On 3306 Engines only, remove the three bolts, locks and suction bell assembly (1) from the oil pan plate and the oil pump.2. Remove bolts (2) that hold the elbow to the oil pump.3. Remove bolts (3), oil pan plate (4) and the gasket from the engine.4. On both sides of the engine, at locations (A) and (B), make an application of 3S6252 RTV Silicone Adhesive/Sealant.5. Put the gasket and oil pan plate (4) in position on the engine. Install bolts (3) to hold them.6. Install bolts (2) that hold the elbow to the oil pump.7. On 3306 Engines only, install the gasket, suction bell (1) and the locks and bolts that hold them.End By:a. install oil pan