DRIVE GP-GOVERNOR & FUEL PUMP 7W5910 - Caterpillar

Illustration 1 g03532114
Left side view
Table 1
Specification for 383-6698 Window Wiper and Washer
Item Qty Part Specification Description
1 - - Torque to 13 2 N m (115 18 lb in).
2 - - Use the following instructions to install the wiper arm:
1. Tighten to 24 1 N m (212 9 lb in), wait for 0.5 hours minimum and maximum of 4 hours.
2. Again, tighten to 24 1 N m (212 9 lb in).
3 2 5C-9553 Bolt Torque to 9 1 N m (80 9 lb in).
Illustration 2 g03532115
Rear view
Table 2
Item Qty Part Specification Description
B - Park position is 43.0 3.0 mm (1.69 0.12 inch).
Illustration 3 g03532113
Front view
Table 3
Item Qty Part Specification Description
4 1 7Y-3474 Check Valve As Body of check valve is roughly in the shape of an arrow.
Assemble arrow from pump towards nozzle.
5 5 1S-9593 Cable Strap Use as required.
The cable straps should not constrict hoses.
Illustration 4 g03532136
Window wiper motor group
Table 4
Item Qty Part Specification Description
6 3 5C-9553 Bolt Torque to 8.5 0.5 N m (75.2 4.4 lb in).
7 1 344-5674 Nut Torque to 20 2 N m (177 18 lb in).
8 - - Tighten the nut to 13 2 N m (115 18 lb in).
9 - - Tighten to 9 1 N m (80 9 lb in).
C - - Wiping angle is 110 2 degrees.