7Y1244 DRIVE GP-SWING Caterpillar parts
322, 322 FM L, 322 LN, 325, 325 L, 325 LN
Rating:
Alternative (cross code) number:
CA7Y1244
7Y-1244
7Y1244
CA7Y1244
7Y-1244
7Y1244
Weight: 626 pounds 283 kg.
EXCAVATOR,
This part in 2 request:
Show.
This information for suppliers only!
2020-06-11
2018-11-29
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine lifting group. Refer to Disassembly and Assembly, "Engine Lifting Group - Remove and Install". Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Disconnect the negative battery cable. Refer to Operation and Maintenance Manual , "Battery or Battery Cable - Disconnect".
Drain the engine oil into a suitable container for disposal. Refer to Operation and Maintenance Manual , "Engine Oil and Filter - Change".
Illustration 1 g01254706
Remove bolts (1). Reposition jacket water heater (3). Remove support (2).
Illustration 2 g01254708
Disconnect harness assembly (4) and (6). Disconnect hose (5).
Illustration 3 g01254710
Disconnect hose (7). Disconnect cable assemblies (12). Disconnect harness assembly (9) and (11). Remove bolts (8) and (10).
Illustration 4 g01254731
Disconnect harness assemblies (13), (15), (16), (17) and (18). Disconnect hoses (14).
Illustration 5 g01254732
Disconnect harness assembly (21). Remove bolts (19) and screen (20).
Illustration 6 g01254733
Position suitable cribbing under generator (22) in order to support generator (22).
Illustration 7 g01254819
Attach a suitable lifting device to engine (23). The weight of engine (23) is approximately 454 kg (1000 lb). Apply lifting tension to engine (23).
Illustration 8 g01254773
Release locks (24). Remove bolts (25).
Illustration 9 g01254777
Remove bolts (26).
Illustration 10 g01254779
Disconnect hose assembly (27). Remove bolts (28) and engine (22).
Start By:
Remove the engine lifting group. Refer to Disassembly and Assembly, "Engine Lifting Group - Remove and Install". Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Disconnect the negative battery cable. Refer to Operation and Maintenance Manual , "Battery or Battery Cable - Disconnect".
Drain the engine oil into a suitable container for disposal. Refer to Operation and Maintenance Manual , "Engine Oil and Filter - Change".
Illustration 1 g01254706
Remove bolts (1). Reposition jacket water heater (3). Remove support (2).
Illustration 2 g01254708
Disconnect harness assembly (4) and (6). Disconnect hose (5).
Illustration 3 g01254710
Disconnect hose (7). Disconnect cable assemblies (12). Disconnect harness assembly (9) and (11). Remove bolts (8) and (10).
Illustration 4 g01254731
Disconnect harness assemblies (13), (15), (16), (17) and (18). Disconnect hoses (14).
Illustration 5 g01254732
Disconnect harness assembly (21). Remove bolts (19) and screen (20).
Illustration 6 g01254733
Position suitable cribbing under generator (22) in order to support generator (22).
Illustration 7 g01254819
Attach a suitable lifting device to engine (23). The weight of engine (23) is approximately 454 kg (1000 lb). Apply lifting tension to engine (23).
Illustration 8 g01254773
Release locks (24). Remove bolts (25).
Illustration 9 g01254777
Remove bolts (26).
Illustration 10 g01254779
Disconnect hose assembly (27). Remove bolts (28) and engine (22).
Caterpillar SIS machinery equipment:
Caterpillar SIS
325, 325L, 325LN EXCAVATORS 2SK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
325, 325L EXCAVATOR 2JK00001-UP (MACHINE) »
7Y-1244
DRIVE GP-SWING
325, 325L EXCAVATOR 8NK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
325, 325 L AND 325 LN EXCAVATORS 2SL00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
322L EXCAVATOR 9RL00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
322 L, 322 LN AND 322 N EXCAVATORS 4RM00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
325, 325L EXCAVATOR 6RM00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP-SWING
322 322L TRACK-TYPE EXCAVATORS 7WL00001-UP (MACHINE) POWERED BY 3116 ENGINE »
7Y-1244
DRIVE GP
Caterpillar parts catalog:
Parts drive Caterpillar catalog:
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 206B, 211B, 212B, 213B, 214B, 224B, 3114, 3116, 3126B, 3126E, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN,...
120H, 120H ES, 120H NA, 135H, 135H NA, 213B, 214B, 3114, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325B, 325B L, 35, 446, 446B, 446D, 45, 525B, ...
1225121
DRIVE GP-SWING
322, 322 FM L, 322 LN, 325
322, 322 FM L, 322 LN, 325
320 L, 322 FM L, 325, 325 L, 325 LN, OEMS
0874771
DRIVE GP-AUXILIARY PUMP
320 L, 320B, 320B FM LL, 322 FM L, 322 LN, 322B, 322B L, 325, 325 FM L, 325 L, 325 LN, 325B L
320 L, 320B, 320B FM LL, 322 FM L, 322 LN, 322B, 322B L, 325, 325 FM L, 325 L, 325 LN, 325B L
6E5443
DRIVE GP-ACCESSORY
322 FM L, 325 FM L, 325 L
322 FM L, 325 FM L, 325 L
1111216
DRIVE GP-SWING
325, 325 L
325, 325 L
1107101
DRIVE GP-SWING
322, 322 FM L, 322 LN
322, 322 FM L, 322 LN
1150, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 1676, 215, 215B, 225, 227, 235, 235D, 30/30, 3116, 3126, 3126...
325, 350, 375, 375 L, 416B, 428, 446, 446B, 613C, 615C, 621E, 621F, 623E, 627E, 627F, 631E, 637E, 65, 65C, 769C, 771C, 773B, 775B, 814B, 815B, 826C, 916, 936F, 950B, 950F, 966F, 966F II, 970F, 980C, 9...
214B, 224B, 3116, 3126, 3126B, 320 L, 320B, 322, 322B L, 322B LN, 322C, 322C FM, 324D, 324D LN, 325, 325B, 325B L, 325C, 325C FM, 325D, 325D L, 533, 539, 543, 613C II, 950F, 953C, 963B, 963C, AP-1000B...
9W1355
DRIVE GP-FLEXIBLE COUPLING
416, 416B, 426, 426B, 428, 428B, 436, 436B, 438, 438B, RT50
416, 416B, 426, 426B, 428, 428B, 436, 436B, 438, 438B, RT50
0821054
DRIVE GP-ROTOR
PR-450C
PR-450C
9U2065
DRIVE GP-SWING
325 L, 325 LN
325 L, 325 LN
1077361
DRIVE GP-ACCESSORY
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793C, 797, 994D, G3508, G3512, G3516, G3516B, G3520...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130B, 5230B, 776D, 777, 777B, 777C, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793C, 797, 994D, G3508, G3512, G3516, G3516B, G3520...
1N3970
DRIVE GP-ACCESSORY
245, 245B, 245D, 3406B, 3406C, 824G, 825G, 826G, 980G, RM-350B, RR-250, SM-350, SS-250
245, 245B, 245D, 3406B, 3406C, 824G, 825G, 826G, 980G, RM-350B, RR-250, SM-350, SS-250
2208158
DRIVE GP-TRACK
267B, 287
267B, 287
5G2752
DRIVE AR-WINCH
931B, 931C, 931C II, 935B, 935C, 935C II, D3B, D3C, D4B, D4C
931B, 931C, 931C II, 935B, 935C, 935C II, D3B, D3C, D4B, D4C
1428760
DRIVE GP-TANDEM
216, 216B, 226B, 228, 242B
216, 216B, 226B, 228, 242B
7N6526
DRIVE GP-FAN
3208, PS-500
3208, PS-500
3844108
DRIVE GP-FAN
420F, 428F, 430F, 432F, 434F, 444F
420F, 428F, 430F, 432F, 434F, 444F