9G5587 DRIVE AS Caterpillar parts
16G, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 613B, 627E, 826C, 920, 966C, 980C, PR-750B
Rating:
Alternative (cross code) number:
CA9G5587
9G-5587
9G5587
CA9G5587
9G-5587
9G5587
Weight: 2 pounds 1 kg.
COLD PLANER, WHEEL TRACTOR,
Cross Reference:
555
1043,
19339,
3272,
4472,
5015,
6015,
61084702,
8110,
9015,
C115,
C115P,
C123,
AIMCO
SO0743,
BOSCH
2006202000,
CATERPILLAR
4N4517,
8S1541,
9G5587,
DELCO REMY
1914341,
1918866,
1918886C,
1921998,
1921999,
1932526,
1932545,
1932605,
FACET
480116,
480410,
480480,
GENERAL MOTORS
54118,
INGERSOLL-RAND
101BMP2992,
101BMP2993,
10BMP2992,
MOTORCRAFT
SDX233,
PRESTOLITE ELECTRIC
59186,
71031,
75249,
850363,
852758,
852957,
M02904472,
M029071031,
M029075249,
PD7A,
REMY
1914341,
1918866,
1918886C,
1921998,
1921999,
1932526,
1932545,
1932605,
SCHMITZ CARGOBULL
131766HC,
232632HC,
SCHWITZER
145828,
Compatible equipment models: 9G5587:
Number on catalog scheme:
28
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-5246 Pump As 1
B 425-0952 Chock 4
C - Loctite 271 Threadlocker High Strength - Start By:
Remove the center drive shaft.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Chock the wheels of the machine with Tooling (B).
Drain the transmission. Refer to Operation and Maintenance Manual, "Transmission Oil - Change" for the correct draining and filling procedures.
Illustration 1 g03680866
Release parking brake. Unscrew clevis assembly (2) from the actuator arm (1) of the parking brake to release tension on the reaction arm.Note: If tension on the reaction arm of the parking brake cannot be released, use Tooling (A) to pressurize the parking brake actuator to release the tension.
Illustration 2 g03680879
Illustration 3 g03680894
Remove bolts (3).
Remove brake drum assembly (4).
Illustration 4 g03680902
Remove bolt (5) and hub (6).
Illustration 5 g03680917
Remove pin (7), bolts (8), and parking brake assembly (9).Installation Procedure
Install parking brake assembly (9) in the reverse order of removal.
Apply tooling (C) to bolt (5).
Tighten bolt (5) to a torque of 120 20 N m (89 15 lb ft).
Adjust the parking brake actuator. Refer to Testing and Adjusting, "Parking Brake Actuator - Adjust" for the correct adjusting procedure.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-5246 Pump As 1
B 425-0952 Chock 4
C - Loctite 271 Threadlocker High Strength - Start By:
Remove the center drive shaft.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Chock the wheels of the machine with Tooling (B).
Drain the transmission. Refer to Operation and Maintenance Manual, "Transmission Oil - Change" for the correct draining and filling procedures.
Illustration 1 g03680866
Release parking brake. Unscrew clevis assembly (2) from the actuator arm (1) of the parking brake to release tension on the reaction arm.Note: If tension on the reaction arm of the parking brake cannot be released, use Tooling (A) to pressurize the parking brake actuator to release the tension.
Illustration 2 g03680879
Illustration 3 g03680894
Remove bolts (3).
Remove brake drum assembly (4).
Illustration 4 g03680902
Remove bolt (5) and hub (6).
Illustration 5 g03680917
Remove pin (7), bolts (8), and parking brake assembly (9).Installation Procedure
Install parking brake assembly (9) in the reverse order of removal.
Apply tooling (C) to bolt (5).
Tighten bolt (5) to a torque of 120 20 N m (89 15 lb ft).
Adjust the parking brake actuator. Refer to Testing and Adjusting, "Parking Brake Actuator - Adjust" for the correct adjusting procedure.
Cat SIS web machinery list:
Parts drive Caterpillar catalog:
120G, 12G, 130G, 140G, 14G, 160G, 1673C, 215, 215B, 235, 3208, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 350, 518C, 528B, 530B, 613, 613B, 615C, 627E, 637E, 815B, 916, 920, 930, 943, 951B, 966C, 966F, 9...
1150, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 1676, 215, 215B, 225, 227, 235, 235D, 30/30, 3116, 3126, 3126...
1140, 1150, 1673C, 1676, 215, 225, 3208, 3304, 3306, 637D, 814, 920, 950, 951B, 966D, 977K, D4D, D4E, D5, D6C, D7F, D7G, G3304
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16G, 16H, 16H NA, 16M, 2290, 2390, 2391,...
130G, 140G, 235, 3208, 3304, 3306, 3306B, 518, 572G, 613B, 613C, 627E, 637E, 815B, 920, 950B, 955L, 963, 966C, D4E, D5H, D6D, D7G, G936
3406, 3406B, 3412, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3512, G3516
1673B, 16G, 245, 3406, 3408, 3412, 631D, 633D, 637D, 651, 657B, 772, 777, 988B, D10, D320A, D330A, D342, D342C, D348, D379, D379A, D398, D399, D44B, D550B, D9L, G398
9F9596
DRIVE AS
3508, 3512, 3516, D342, D342C, D348, D349, D353C, D379B, G399
3508, 3512, 3516, D342, D342C, D348, D349, D353C, D379B, G399
9T1260
DRIVE SHAFT
7271, 824C, 980C, 980F, R1700 II
7271, 824C, 980C, 980F, R1700 II
120G, 12G, 140G, 16G, 613C, 631C, 631E, 651E, 657E, 773, 777B, 815B, 824B, 950B, 951B, 955L, 988B, 992C, D4D, D5, D5H, D7G
815, 966C
0819934
DRIVE GP-UPPER
PR-750B
PR-750B
120M, 12M, 14H, 16G, 16H, 16H NA, 2290, 2390, 2391, 245B, 2491, 2590, 3176, 3176B, 3176C, 3196, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412E, 3456, 345B II, 345B II MH, 345B L, 35...
1673B, 16G, 245, 3406, 3408, 3412, 631D, 633D, 637D, 651, 657B, 772, 777, 988B, D10, D320A, D330A, D342, D342C, D348, D379, D379A, D398, D399, D44B, D550B, D9L, G398
3406, 3406B, 3412, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3508, G3512, G3516
6N4159
DRIVE AS-GOVERNOR
3408, 3408B, 3412, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 834B, PM-565
3408, 3408B, 3412, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 834B, PM-565
6N8779
DRIVE AS-FLEXIBLE
3408, 3412, 657E, 988B, 990, 992C, 992D
3408, 3412, 657E, 988B, 990, 992C, 992D
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 657E, 769C, 772B, 773B, 775B, 834B, 988B, 988F, 992C, D10N, D8L, D9L, D9N, D9R, PR-1000, PR-450C, PR-750B
214B, 224B, 3116, 3126, 613C II, 950F, 950F II, 960F, CB-634C, CP-563, IT28F, M318
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 135H, 135H NA, 140G, 140K, 140K 2, 160K, 214B, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 32...
3116, 3126, 3126B, 3208, C7
214B, 224B, 3116, 3126, 3126B, 320 L, 320B, 322, 322B L, 322B LN, 322C, 322C FM, 324D, 324D LN, 325, 325B, 325B L, 325C, 325C FM, 325D, 325D L, 533, 539, 543, 613C II, 950F, 953C, 963B, 963C, AP-1000B...
4N9334
DRIVE AS
3116, 3208
3116, 3208
9F9596
DRIVE AS
3508, 3512, 3516, D342, D342C, D348, D349, D353C, D379B, G399
3508, 3512, 3516, D342, D342C, D348, D349, D353C, D379B, G399