DRIVE GP-FINAL 9Q5532 - Caterpillar

Illustration 8 g00867646
Tilt panel (31) rearward in order to install the flywheel housing bolts.
Install bolts (30).
Illustration 9 g00867645
Install bolts (29).
Illustration 10 g00867644
Position bracket (28) and install bolts (26).
Connect harness assemblies (27).
Illustration 11 g00867643
Install bolt (24) in order to connect assemblies (25).
Connect hose assemblies (23).
Illustration 12 g00867549
Connect hose assemblies (22).
Connect harness assembly (21).
Illustration 13 g00867642
Connect hose assemblies (20).
Connect hose assemblies (19).
Illustration 14 g00867641
Connect hose assemblies (17) and (18).
Illustration 15 g00867640
Position plate (15) with the valve assembly.
Connect harness assembly (14).
Connect hose assemblies (16).
Connect hose assemblies (13).
Illustration 16 g00867550
Install plug (11) into main pump suction tube assemblies (12).
Illustration 17 g00867544
Position panel (7).
Tilt panel (7) rearward in order to install bolts (10) into muffler support (9).
Illustration 18 g00867542
Install bolts (8) into panel (7).
Illustration 19 g00867539
Position brackets (6) and install bolts (5).
Illustration 20 g00867537
Position cover (4).
Install bolts (3).
Fill the oil from the hydraulic oil tank into a suitable container for storage or disposal. The capacity of the hydraulic oil tank is 145 L (38 US gal). Reference: Refer to Operation and Maintenance, "Hydraulic System Oil - Change" in the service manual.
Illustration 21 g00867525
Close access door (2) on the right side of the machine.
Illustration 22 g00688875
Install access covers (1) that are under the hydraulic pump. End By:
Install the muffler. Disassembly and Assembly, RENR5368, "Muffler - Remove and Install".
Install the hood. Disassembly and Assembly, RENR5368, "Hood - Remove and Install".