DRIVE GP-FLEXIBLE COUPLING 9W1355 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9352 Engine Stand 1 Start By:
Remove the engine. Refer to Disassembly and Assembly, "Engine - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Attach the engine to Tooling (A).
Remove the rocker shaft assembly and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Turn the engine upside-down so the valve lifters are held in a position away from the camshaft.
Illustration 1 g01255264
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully remove camshaft (1) from the cylinder block. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9352 Engine Stand 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Ensure that the camshaft is clean. Lubricate the camshaft with clean engine oil prior to installation.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Illustration 2 g01255264
Carefully install camshaft (1) in the cylinder block.
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".
Install the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Install".
Remove the engine from Tooling (A). End By:
Install the engine. Refer to Disassembly and Assembly, "Engine - Install".