DRIVER-V SEAT 3436647 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     311-1362     Vacuum Cap     1    
B     138-7575     Link Bracket     2    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01398338
The harness assembly and tube assemblies are removed for photographic purposes.
Attach Tooling (B) and a suitable lifting device in order to position bank valve (11). The weight of bank valve (11) is approximately 60 kg (132 lb).
Illustration 2 g01398334
The harness assembly and tube assemblies are removed for photographic purposes.
Illustration 3 g01398333
The harness assembly and tube assemblies are removed for photographic purposes.
Install bolts (12) .
Illustration 4 g01417561
Connect tube assembly (10). Connect fitting (9). Connect tube assemblies (8) and tube assembly (7) .
Illustration 5 g01417551
Connect harness assemblies (6). Repeat for the opposite side of the machine.
Illustration 6 g01417544
Connect hose assemblies (5). Connect tube assemblies (4). Connect tube assemblies (3) .
Illustration 7 g01398305
Use two people in order to position cover (1). The weight of cover (1) is approximately 32 kg (70 lb). Install bolts (2). Repeat for the opposite side of the machine.
Illustration 8 g01397769
Remove Tooling (A) .
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities - Refill".End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".