DRIVER 3972047 - Caterpillar

3972047 DRIVER Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3972047
397-2047
3972047

Weight: 1 pounds 0 kg.

Buy DRIVER 3972047 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
ZZ 9U-7073 Tapered Cap/Plug 2
9U-7074 Tapered Cap/Plug 2
9U-7075 Tapered Cap/Plug 1
9U-7076 Tapered Cap/Plug 1 Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Drain the oil from the implement hydraulic tank into a suitable container.
Illustration 1 g01135339
Open access door (1) behind the cab.
Illustration 2 g01134031
Remove bolts (2) and disconnect tube assembly (3) .
Illustration 3 g01134032
Remove bolts (4) and disconnect hose assembly (5) .
Illustration 4 g01134033
Remove bolts (7) and disconnect hose assembly (6) .
Illustration 5 g01134035
Attach a suitable lifting device to gear pump (8). Remove bolts (9) .
Illustration 6 g01134037
Use the suitable lifting device in order to remove gear pump (8). The weight of gear pump (8) is approximately 68 kg (150 lb).