DRIVER 5157782 - Caterpillar

Installation Procedure
Install the O-ring seal on the piston motor.
Illustration 1 g01524864
Install the piston motor (13) and bolts (15).
Connect hose assemblies (14) to piston motor (13).
Illustration 2 g01524863
Illustration 3 g01524861
Attach a suitable lifting device to final drive assembly (12). Install final drive assembly (12) and bolts (11). The weight of final drive assembly (12) is approximately 396 kg (876 lb).
Install bolts (10).
Illustration 4 g01524859
Install clamp (9).
Illustration 5 g01524857
Install cover (8) and the bolts.
Install clamp (7).
Illustration 6 g01524855
Install clamps (6). Connect hose assemblies (5).
Illustration 7 g01524854
Connect hose assembly (4).
Illustration 8 g01524853
Connect harness assembly (3).
Illustration 9 g01524852
Connect hose assemblies (1) to piston pump (2).
Fill the hydraulic oil tank with hydraulic oil. Refer to Operation and Maintenance Manual for the correct procedure. End By:
Install the wheel (rear). Refer to Disassembly and Assembly, "Wheel (Rear) - Remove and Install".