DRIVER SLEEVE 5P6200 - Caterpillar

1. Remove large O-ring seal (1) from the inside of the filter base.2. Remove small O-ring seals (2) and (3) from the filter base. 3. Remove plug (6). Remove the O-ring seal from the plug.4. Remove valve (5). Remove spring (4).Assemble Transmission Oil Filter Base
1. Install spring (3) in the oil filter base.2. Put valve (2) in position in the base and over the spring.3. Install the O-ring seal on plug (1). Install the plug in the base.4. Install O-ring seal (4) in the oil filter base.5. Install the two small O-ring seals in the ports for inlet and outlet oil for the base.end by:a) install transmission oil filter base