DRUM AS-PADDED 1393181 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-8358 Eyebolt 2
B - Loctite 243 - Start By:
Remove the mounting bracket.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g06222279
Remove bolts (1) and cover (2). Repeat for the opposite side.
Illustration 2 g06222283
Disconnect hose assemblies (3).
Illustration 3 g06222284
Remove bolts (4) and manifold (5).
Illustration 4 g06222286
Disconnect hose assembly (6).
Illustration 5 g06222287
Illustration 6 g06222288
Remove bolts (7) and block (8). Remove tube (9).
Repeat Step 4 and Step 5 for the other side.
Illustration 7 g06235674
Attach Tooling (A) and a suitable lifting device to swivel (11). The weight of swivel (11) is approximately 40 kg (88 lb).
Remove bolts (10) and swivel (11).Installation Procedure
Install swivel (11) in the reverse order of removal.
Apply Tooling (B) to the threads of bolts (10). Tighten bolts (10) to a torque of 105 20 N m (77 15 lb ft).
Apply Tooling (B) to the threads of bolts (7). Tighten bolts (7) to a torque of 105 20 N m (77 15 lb ft).
Apply Tooling (B) to the threads of bolts (4). Tighten bolts (4) to a torque of 105 20 N m (77 15 lb ft).