DRUM 3Y0889 - Caterpillar

Machine ID Worksheet Entries
Enter the following information for future reference:Machine ID Number____________________Machine Name____________________Display Serial Number____________________Machine Dimensions____________________Radio Serial Number____________________Application (Grade or Ore) ____________________Grade Tolerance (provided by site)____________________Setting the Language
There are two ways to select the language that appears on the display module:
The office selects the language file by sending a file activate of the specific language file from the office to the machine.
The operator selects the language file through the "Select Language File" dialog.Note: The on-board software receives tasks from other applications such as Task List Manager. These tasks can be sent in any language that is supported by the keyboard and operating system being used in the office. The on-board software receives these tasks in any language that the operating system supports.
Menu - Opens the main menuTo use the "Select Language File" dialog to set a new language on the display, complete these steps:
Illustration 27 g03747546
"Select Language File" dialog
From the main menu, select "System" > "Select" > "Select Language File". The "Select Language File" dialog appears.By default, the following languages are listed in the "Select Language File" dialog:
English (default)
French
Spanish
Swedish
Portuguese
Russian
Mongolian
Select the language that will be used on the display module.For example, to use the Spanish language, select "5.0 Spanish".
Select "OK".Note: When the operator shuts down the on-board software, the selected language file is saved.Reference: For information on advanced tasks such as editing the "Set Language File" dialog, installing a new language in the MCU, and using resource files and language identifiers, refer to Systems Operation, KEN8277, "Language Support".Using the Machine Configuration Utility
The Machine Configuration Utility (MCU) is a tool that configures advanced machine settings. The software replaces the previous method of editing the machine configuration file (mach_cfg.txt) file by hand.Reference: For information on using the MCU, select Start > All Programs > Cat MineStar System and Tools > Machine Configuration Utility.Reference: For information on adding the machine in Cat MineStar System, refer to Systems Operation, RENR9562, "Cat® Terrain Administration and Configuration Guide".Performing the Dimension Measurements and Measure-up
Illustration 28 g06122911
Machine Dimensions - Side View
Note: The satellite receiver is shown mounted on the cab in Illustration 28. The correct mounting location for the receiver is on the bowl mounted to a 4 foot Mast.
Illustration 29 g06122914
Machine Dimensions - Top View
Reference: Refer to the side view in Illustration 28 and the sample MCU screen shot Illustration 29 as a reference guide and template to record the machine receiver offsets and the machine dimensions.
Enter correct details. Any errors transfer directly into the finished as-built surface file. All measurements are in meters.
To set up the machine in the office, complete these steps:
On the machine, measure the machine receiver offsets.
The "X" measurement that is taken to the right of the centerline of the machine is a positive number.
The "X" measurement that is taken to the left of the centerline of the machine is a negative number.
The "Y" measurement that is taken in front of the front axle will be a positive number.
The "Y" measurement that is taken behind the front axle is a negative number.
Illustration 30 g03790017
Measuring for the