DRUM 5293678 - Caterpillar

Remove cap (1) .
Illustration 2 g01316159
Remove six bolts (2), the six nuts, and grip (3) .
Illustration 3 g01316161
Remove spring (4) and (6) .
Remove boot (5) .
Illustration 4 g01316162
Remove bolts (8) in order to separate plate (7) from control group (9) .
Illustration 5 g01316163
Remove wedge (12) in order to separate receptacle (11) from harness assembly (10) .
Illustration 6 g01316164
Remove cable strap (13) and harness sleeve (14) .
Illustration 7 g01316165
Spread clip (16) in order to remove switch assembly (15) from control group (9) .Note: The pins must be removed from the wires in order to remove the switch assembly from the control group.
Illustration 8 g01316166
Remove nut (19), O-ring seal (18), and plate (17) .
Illustration 9 g01316485
Remove bolts (20) .
Illustration 10 g01316546
Once the bolts are removed in the Step 10, the control group and valve (21) will separate.
Illustration 11 g01316529
Remove elbows (22) and fittings (23) from valve (24) .
Illustration 12 g01316486
Remove bolts (25) and switch (26) .
Remove bolts (27) and switch (28) .
Illustration 13 g01316491
Remove bolts (31) and the nuts in order to separate switch (26) and bracket (30) .
Spread clip (29) in order to remove switch (26) .
Illustration 14 g01316595
Remove bolts (34) and the nuts in order to separate switch (28) and bracket (33) .
Spread clip (32) in order to remove switch (28) .
Illustration 15 g01316601
Remove cotter pin (39) and cam (38) .
Remove cotter pin (37) and cam (40) .
Remove nut (36), the setscrew, the spacer, the spring washer, and the disk.
Separate handle (35) from base plate (41) .