AVSPARE.COM
parts catalog

DRUM 5435584 - Caterpillar


5435584 DRUM Caterpillar parts
Rating:
66
Alternative (cross code) number:
CA5435584
543-5584
5435584
Caterpillar 5435584 DRUM
Weight: 1717 pounds 778 kg.

Buy DRUM 5435584 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Improper lifting and improper tie-downs can allow the load to shift or fail and cause injury or damage. Use only properly rated cables and slings with lift and tie down points provided.Follow the instructions in Operation and Maintenance Manual, "Lifting and Tying Down the Machine" for the proper technique for securing the machine. Refer to Operation and Maintenance Manual, "Specifications" for specific weight information.
Illustration 1 g00822494
Illustration 2 g00823189Lifting and Tying Down the Machine
The following instructions are for machines that are manufactured by Caterpillar Inc. without any modifications by the user. The weight of the machine is listed in Operation and Maintenance Manual, "Specifications". These weights are for machines that are manufactured by Caterpillar Inc. without any modifications by the user.
Position the cab of the machine over the steering axle before you lift the machine.
Use corner protectors on sharp corners. For lifting, use proper rated cables and proper rated slings. For level machine lifting, position the crane properly.
The spreader bars and the lifting cables should have sufficient length in order to prevent contact with the machine.
In order to tie down the machine, use the rear eyes and the front eyes that are provided on the lower frame.
Engage the parking brake and the swing lock before you tie the machine to the truck bed or before you attach the machine with slings. Lifting the Machine Segments
Bucket
Illustration 3 g00115251
(1) Pin. (2) Sleeve. (3) Bolts. (4) Nuts.
Install pin (1) and install sleeve (2) in the brackets of the bucket. The previous illustration indicates the method to secure pin (1) with bolts (3) and nuts (4). Fasten two proper rated wire cables to pin (1).


Parts drum Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.