DRUM AS-HOIST 5463740 - Caterpillar

File Activation File Setup
The following sections describe how to set up File Activation for an operator. Reference: For detailed information about the configuration settings that are discussed in the following sections, refer to the MCU Help file, Multiple File Activation - Reference.Set Up the File Path and the File Name
"File Activation File" - Specifies the file path and file name for a file activation file. If the file is not in the CAES working directory, then the full path to the file must be used.
Table 1
Configuration Settings for Five File Activation Files
File Activation File 0 =data\Test Activation file1.txt
File Activation File 1 =data\Test Activation file2.txt
File Activation File 2 =data\Test Activation file3.txt
File Activation File 3 =data\Test Activation file4.txt
File Activation File 4 =data\Test Activation file5.txt Set Up the File Activation File
The following setting is used to set up the file activation file:"Data File Name" - Specifies the file*.cat type and the *.cat file name. The order of the settings defines the file priority. Reference: For additional information on the above setting, refer to the MCU Help file.Illustration 1 shows a sample of the data that is found in a file activation file named Test Activation file.txt.
Illustration 1 g03396118The file configurations in Table 2 are applied when the Test Activation File.txt file is activated.
Table 2
File Configuration for Test Activation file1.txt
Prime ore design file Section 2.cat
Active ore design file Section 1.cat
Prime elevation design file incline.cat
Prime display file Pond Area.cat
Prime current elevation file Current.cat
Prime ore status file Mined 2.cat File Description Setup
"File Activation File Description" - Specifies a description for each of the file activation files. The description provides customized identification for each of the files.The settings in Table 3 provide descriptions for each of the five file activation files specified in Table 1.
Table 3
File Activation Description Settings
File Activation File Description 0 = Bench 2500
File Activation File Description 1 = Bench 2550
File Activation File Description 2 = Bench 2600
File Activation File Description 3 = Bench 2650
File Activation File Description 4 = Bench 2700
Menu - Opens the main menuTo select the description in the on-board software, from the main menu, select "Files" > ["description"]Note: In the absence of the File Activation File Description settings, the file name of the file activation file is used in the "Files" submenu.