DRUM 5B3270 - Caterpillar

Illustration 5 g03566975
Illustration 6 g03566868
Brightness Adjust Screen (View Mode)
The Brightness Adjust screen allows the user to adjust the monitor backlight brightness for daylight and darkness individually. Perform the following steps to adjust the monitor backlight brightness.
From the "Display Setting" menu, use the appropriate Up key (5) or Down key (6) to highlight the "Brightness Adjust" menu.
Press the "OK" button (3). The Brightness Adjust screen will appear.
Use the Up or Down key to highlight Day or Night. The selected Day or Night button will highlight in blue.
Press the "OK" button. The selected Day or Night button will highlight in green (Edit Mode) and will allow backlight brightness adjustment.
Use the Left or Right key to increase or decrease a value.
Press the "OK" button to save settings.Display Unit Select
Illustration 7 g03566971
Illustration 8 g03566909
Unit System Selection Screen
(8) Selection IndicatorThe Unit System Selection Screen allows the user to change the unit system used for the monitor display.
From the "Display Setting" menu, use the appropriate Up or Down key to highlight the "Display Unit Select" menu.
Press the "OK" button. This operation will allow access to the "Unit Select" screen.
Use either the Up or Down key to highlight (in blue) "Metric" or "Imperial".
Press the "OK" button to select the highlighted item.Note: A Selection Indicator (8) will appear on the far left of the screen showing that the item is selected.Default Screen Setting
Illustration 9 g03566967
Illustration 10 g03577378
(9) "Monitor View" keyThe "Default Screen Preset" menu allows the operator to change the default screen image when the monitor is turned on.Note: This menu function is only available when the machine is equipped with a rear view camera and a side view camera.Default Screen Setting Procedure
Press any of the arrow keys to highlight the "Default Screen Setting" menu. Press the "OK" button.
Press the Up or Down arrow key to select the default screen type. Press the "OK" button to enter the edit mode.Note: The Default screen (Pattern A) is preset at the factory and cannot be changed for the factory-equipped rear view camera or rear view and side view camera. The Default screen can be changed for other camera modes.
Press the Up or Down arrow key to select the default screen type. Press the "OK" button to highlight the default screen type. Press the Up or Down arrow key to set the display pattern.Note: Press the "Monitor View" key (9) to preview the selected default screen.
Press the "OK" button to store the selected pattern.
Press the "Back" button (2) to return to the previous screen. To return to the main menu, press the "Home" key (1).Types of Default Screens
Pattern A - Gauges Only (No Camera View)
Illustration 11 g03586366On machines without a camera, the monitor displays only the Pattern A screen on the Default screen (camera view is not displayed). Gauges are displayed in large view.Pattern B - Gauges with Camera View
Illustration 12 g03586380Gauges and camera view are displayed simultaneously. Pattern B is the default display if the rear view camera or rear view and side view camera are equipped on the machine. When the event indicator becomes active,