DRUM AS 9U8876 - Caterpillar

Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front-mounted bucket or another work tool. The principal intended functions of this machine are for digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel. Additional work tools allow this machine to perform other specific tasks.Specified Useful Life or Expected Life
The specified useful life, defined as total years of operation, or expected life, defined as total machine hours, of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machine’s specified useful life or expected life. The following items are required to obtain an economical specified useful life or expected life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.
Ensure that all frame cracks are identified, inspected, and repaired to prevent further development.Application/Configuration Restrictions
Refer to "Machine Data" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.The maximum fore/aft slope for proper lubrication is 20 degrees continuous and 30 degrees intermittent.This machine is approved for use in environments with no explosive gases.Machine Data
Illustration 1 g06227590This machine is equipped with a C15.2 Engine.Basic machine specifications are listed below.
Table 1
986K Wheel Loader
Operating Weight 44355 kg (97785 lb)
Height (Top of Cab Roof) (A) 4100 mm (13 ft 6 inch)
Maximum Overall Length (B) 11591 mm (38 ft 1 inch)
Width across Tires (C) 3810 mm (12 ft 6 inch)