DRYER & LINES GP-AIR 2278339 - Caterpillar

The 128-4773 Bracket Extension Assembly is used to remove and install differential group (holds group in a horizontal position) on 785, 789, and 793 Off-Highway Trucks.143-4987 Lifting Bracket Assembly
Illustration 10 g03243717
(1) 128-4775 (4) 143-4987The 143-4987 Lifting Bracket Assembly is used to remove and install inner planetary carrier assembly while rear wheel station is in horizontal orientation on 769 through 777 Off-Highway Trucks.151-7537 Adapter Bracket Assembly
Illustration 11 g03243801
(1) 128-4775 (5) 151-7537The 151-7537 Adapter Bracket Assembly is used to remove and install compactor pods on CS/CP533C, CS/CP563C, and CS583C Vibratory Compactors.152-7247 Handling Bracket Assembly
Illustration 12 g03244356
(1) 128-4775 (6) 152-7247The 152-7247 Handling Bracket Assembly is used to remove and install final drive planetary carriers on 785, 789, 793, and 797 Off-Highway Trucks and 994 Wheel Loaders.153-1174 Handling Bracket Assembly
Illustration 13 g03244378
(1) 128-4775 (7) 153-1174The 153-1174 Handling Bracket Assembly is used to remove and install the inner planetary carrier on 797 Off-Highway Trucks.153-1175 Handling Bracket Assembly
Illustration 14 g03244422
(1) 128-4775 (8) 153-1175419-6576 Adapter Plate
Illustration 15 g03244499
(1) 128-4775 (9) 419-6576The 419-6576 Adapter Plate is used to lift and install loader arm hollow linkage pins, with 38 mm (1.5 inch) center hole on 994D Wheel Loaders.9U-6122 Lifting Adapter Assembly
Illustration 16 g03244596
(1) 128-4775 (10) 9U-6122The 9U-6122 Lifting Adapter Assembly is used to remove and install inner planetary carriers on 793 Trucks and 994 Wheel Loaders.Maintenance and Inspection
Inspect the lifting bracket assembly, adapter plates, and bracket extension assemblies before each use. Immediately replace any damaged parts.
Inspect all welds and check for damaged or bent components.
Clean the tools using a nonsolvent based cleaner.
Replace any damaged or missing films.
Periodically lubricate the threaded rod using 222-3116 Dry Lubricant or equivalent.
Have the tools inspected annually by an approved dealership inspector.
Moisture and/or high humidity can damage the threaded rod. Store the tool indoors in a clean, dry location. Store flat or supported at lifting eye to prevent falling.
At the end of the operational life of the tool, destroy and dispose of as scrap.