DUCT AS 1795359 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Illustration 1 g00101586
Illustration 2 g00834920
Remove the access cover that is located below the swing drives. Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information that pertains to Containing Fluid Spillage.
Remove drain hose (2) from holder (1) on the upper frame. Face the end of the hose toward the container.
Use a universal joint with a socket extension to loosen the drain valve in hole (3) . Drain the oil into a suitable container.Note: Drained fluids should always be disposed of according to local regulations.
Illustration 3 g00834927
Tighten the drain valve. Hook the drain hose (2) to the holder (1) . Make sure that the end of the hose is facing upward.
Illustration 4 g00834933
Remove dipstick (4) .
Add the specified quantity of oil through the dipstick tube. See Operation and Maintenance, "Capacities (Refill)".
Illustration 5 g01049757
Maintain the oil level between the tip of the dipstick and the mark on the dipstick (4) .
Check the oil that has been drained for metal chips or metal particles. Consult your Caterpillar dealer if any metal chips or metal particles are found.
Drained materials should always be disposed of according to local regulations.