DUCT AS-EXHAUST 2843521 - Caterpillar

2843521 DUCT AS-EXHAUST Caterpillar parts C15, TH35-C15T

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2843521
284-3521
2843521

Weight: 3 pounds 1 kg.

Buy DUCT AS-EXHAUST 2843521 Caterpillar genuine, new aftermarket tractor parts with delivery
PETROLEUM PACKAGE, TRUCK ENGINE,

Show more prices Caterpillar parts

This part in 3 request: Show. This information for suppliers only!

#964252 2843521

2022-09-06

#631932 2843521

2021-04-10

#453137 2843521

2020-04-24

Compatible equipment models: 2843521:

PETROLEUM PACKAGE TH35-C15T

TRUCK ENGINE C15 Caterpillar

Number on catalog scheme: 4

Caterpillar 2843521 Parts scheme DUCT AS-EXHAUST

For full view, you need register

Information:

Illustration 153 g00901662
Illustration 154 g00901663
Install drive yokes (41) and (42) , washers (39) and (40) , and bolts (37) and (38) onto both ends of the output shaft.Note: Ensure that drive yokes (41) and (42) are installed with the same phase angle.
Illustration 155 g00901664
Install actuator (36) and bolts (35) onto transmission cover (10) .
Illustration 156 g00901665
Install actuator (20) and bolts (19) onto transmission cover (21) .
Transmissions with five speeds have additional components that need to be assembled and installed.
Illustration 157 g00901666
Install O-rings (17) on actuator (9) and install O-ring seal (18) on piston (16) . Then install the piston into the actuator.
Install O-ring seals (14) and (15) onto the valve spool of solenoid (13) .
Illustration 158 g00901667
Install solenoid (13) , locking plate (12) and allen head screw (11) onto actuator (9) . Position actuator (9) onto transmission cover (10) and install bolts (8) .
Illustration 159 g00901668
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install detent ball (7) and spring (6) into the cavity of transmission cover (10) .
Illustration 160 g00901669
Use a suitable allen wrench in order to install cap (5) onto transmission cover (10) .
Illustration 161 g00901670
Install sensor (4) for the shift rail and allen head screws (3) onto transmission cover (10) .
Illustration 162 g00903009
Use a suitable drift in order to install core plug (279) into transmission housing (21) .
Illustration 163 g00900315
Install O-ring seals (272) onto speed sensors (268) , (269) and (271) .
Illustration 164 g00899491
Install speed sensors (268) , (269) , and (271) into transmission housing (21) . Install allen head bolts (267) and bolt (270) in order to secure speed sensors (268) , (269) , and (271) to the transmission housing.Note: The speed sensors differ from each other, and each one must be installed in the correct location that is shown in Illustration 164.
Illustration 165 g00901672
Use allen head screws (1) in order to install position sensors (2) onto transmission housing (21) .End By:
Install the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Assemble".
Install the transmission. Refer to Disassembly and Assembly, "Transmission - Install".